New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Multistar High Capacity 5200mAh 6S 10C Multi-Rotor Lipo Pack

Multistar High Capacity 5200mAh 6S 10C Multi-Rotor Lipo Pack

Now save save $22.90 $22.90

Special Price $29.99 $29.99

You save save $22.90 $22.90

Was  $52.89

Status:
Out of stock!
SKU:
912700003-0
WANT FREE SHIPPING? Click here to find out more!

*** This item is no longer available from the international warehouse due to air freight restriction.  You can however purchase the item through our regional warehouses for you convenience. ***

Want to dramatically increase your multi-rotor flight times without the penalty of added weight? We have just the solution!

The all new Multistar high capacity batteries are the result of extensive testing and development with one goal in mind...increasing flight times for your multi-rotor aircraft without the penalty of added weight.

We have achieved our goal by drastically increasing the battery capacity (mAh) while lowering the discharge rate. This results in a battery which is still capable of providing sufficient current (Amps) while offering much higher capacity when compared to a standard 20C+ LiPoly battery of the same weight.

What this all means is that Multistar batteries are able to provide flight times much longer than standard LiPoly battery packs without adding any weight to your multi-rotor model, making them absolutely ideal for use with aerial video and FPV multi-rotor aircraft.

We have a full range of Multistar High Capacity Multi-Rotor battery packs in the works and will be adding new sizes/configurations as they become available. Be sure to checkout the product video for more in-depth info about these all new high capacity multi-rotor battery packs.

Features:
• Ultra high capacity LiPoly batteries designed specifically for multi-rotor use
• Similar size/weight as batteries of much lower capacity, making these a direct drop-in upgrade for most multi-rotor aircraft
• Provides increased flight times of up to 20% or more when compared to standard LiPoly batteries of the same weight
• Ideal for use with aerial video and FPV multi-rotor aircract

Specs:
Minimum Capacity: 5200mAh
Configuration: 6S1P / 22.2V / 6Cell
Constant Discharge: 10C
Peak Discharge (10sec): 20C
Pack Weight: 643g
Pack Size: 142 x 49 x 43mm
Charge Plug: JST-XH
Discharge Plug: XT60

  • SKU 912700003-0
  • Brand MultiStar
  • Shipping Weight 697.0000
  • Length 185.00
  • Width 60.00
  • Height 85.00
  • Capacity (mAh) 5200.00
  • Discharge(c) 10.00
  • Max Charge Rate(C) 2.00
  • Length-A(mm) 142.00
  • Height-B(mm) 49.00
  • Width-C(mm) 43.00
  • Multistar High Capacity 6S 5200mAh Multi-Rotor Lipo Pack
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

batteries look good, solid and square, no puffing. shipped almost depleted, mine were all right around 3.75V. bringing up to 3.85V for storage put in 1250mah, quite a bit. This makes me believe these batteries have pretty good capacity.
I'll update this review after running them for a few cycles.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

batteries look good, solid and square, no puffing. shipped almost depleted, mine were all right around 3.75V. bringing up to 3.85V for storage put in 1250mah, quite a bit. This makes me believe these batteries have pretty good capacity.
I'll update this review after running them for a few cycles.

My battery is no longer working, I used it 2 times, voltage on one of cell is bellow 3V and battery is useless. I used with max 25A.
Warranty is end, because one month only, so I can move this battery to trash :( Maybe only main was deffective.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My battery is no longer working, I used it 2 times, voltage on one of cell is bellow 3V and battery is useless. I used with max 25A.
Warranty is end, because one month only, so I can move this battery to trash :( Maybe only main was deffective.

Watch out for this battery. one blown my power module because it generates 25.4V.
I ordered 2 of these batteries and the other generates 23.5V
They are useless for my project..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Watch out for this battery. one blown my power module because it generates 25.4V.
I ordered 2 of these batteries and the other generates 23.5V
They are useless for my project..

Gewicht 642g inkl. 12cm 14AWG Kabel mit XT60 Golkontaktstecker und 7,5cm Balancerkabel mit Stecker

Abmessungen 142,5 x 49,5 x 43,8mm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gewicht 642g inkl. 12cm 14AWG Kabel mit XT60 Golkontaktstecker und 7,5cm Balancerkabel mit Stecker

Abmessungen 142,5 x 49,5 x 43,8mm

I purchased these for my Tarot t960 hex. I testing to see what kind of flight time I will get with them compared to my turnigy 6s, 5000mah batteries. All cells were at 3.8 for both of my 6s multistar batteries.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased these for my Tarot t960 hex. I testing to see what kind of flight time I will get with them compared to my turnigy 6s, 5000mah batteries. All cells were at 3.8 for both of my 6s multistar batteries.

Overall, I will have to repeat a review above mine, IR of the cells in the pack range from o.07 to o.25 after using 4amps voltage drops from 21.6v to 17V in less than 30sec, average draw is 10-12ah with pikes to 27-30ah. have Arducopter Logs as proof. Good thing was flying at only about 3-4 meters at that time, so no damage.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall, I will have to repeat a review above mine, IR of the cells in the pack range from o.07 to o.25 after using 4amps voltage drops from 21.6v to 17V in less than 30sec, average draw is 10-12ah with pikes to 27-30ah. have Arducopter Logs as proof. Good thing was flying at only about 3-4 meters at that time, so no damage.

Purchased two of these for a hexa project. In testing the internal resistance as part of the first flight pre-testing I found it varied quite a bit between cells. I'm not willing to risk my rig to a voltage drop at altitude. I'll only trust these in parallel to avoid any catastrophes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased two of these for a hexa project. In testing the internal resistance as part of the first flight pre-testing I found it varied quite a bit between cells. I'm not willing to risk my rig to a voltage drop at altitude. I'll only trust these in parallel to avoid any catastrophes.

Customer files
IMG_20171124_231919.jpg Download [2]
IMG_20171124_232218.jpg Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save