High Voltage Lipoly batteries (LiHV) offer greater power density than traditional lipoly batteries allowing you to increase your flight times without the penalty of added weight
Multistar high capacity batteries are the result of extensive testing and development with one goal in mind...increasing flight times for your multi-rotor aircraft without the penalty of added weight.
We have achieved our goal by drastically increasing the battery capacity (mAh) while lowering the discharge rate. This results in a battery which is still capable of providing sufficient current (Amps) while offering much higher capacity when compared to a standard 20C+ LiPoly battery of the same weight.
What this all means is that Multistar batteries are able to provide flight times much longer than standard LiPoly battery packs without adding any weight to your multi-rotor model, making them absolutely ideal for use with aerial video and FPV multi-rotor aircraft.
LiHV stands for “High Voltage Lithium Polymer”. These batteries have been around for years and can be safely charged to 4.35V, higher than the typical voltage of Lipos.
The advantages of LiHV batteries are the higher power and longer running times. LiHV batteries can be charged to 4.35V per cell, higher than normal LiPo batteries which sit at 4.20V. For example, a 4S LiHV pack charged at 4.35V would give you 17.4V. Whereas a Lipo battery on the same charge would only get 16.8V. LiHV batteries also have a lower internal resistance and are less prone to "puffing".
We have a full range of Multistar High Capacity Multi-Rotor battery packs in the works and will be adding new sizes/configurations as they become available.
• LiHV Chemistry (Requires LiHV capable charger)
• Ultra high capacity LiPoly batteries designed specifically for multi-rotor use
• Fitted with genuine XT90 connectors
• Similar size/weight as batteries of much lower capacity, making these a direct drop-in upgrade for most multi-rotor aircraft
• Provides increased flight times of up to 30% or more when compared to standard LiPoly batteries of the same weight
• Ideal for use with aerial video and FPV multi-rotor aircraft
Minimum Capacity: 4000mAh
Configuration: 4S / 14.8v / 4Cell
Constant Discharge: 10C
Peak Discharge (10sec): 20C
Pack Weight: 345g
Pack Size: 110 x 36 x 52mm
Charge Plug: JST-XH
Discharge Plug: XT60
Unit Weight (g)
Max Charge Rate(C):
The best battery to increase your drone Phantom 3 flight time . It is lightweight and with almost the same battery power capacity. Mounted in your drone, allows flights up to 28 minutes!Great battery, I get a solid 20 minutes in my S500, NAZA M, Sunnsyky 2212-13 980Kv, HQ 1045 setup. I think the LiHV is worth the money and the Turnigy S60 Charger is perfect with this.