Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

Multistar Propeller with DJI Fitting 10x4.5 Black (CCW) (2pcs)

Multistar Propeller with DJI Fitting 10x4.5 Black (CCW) (2pcs)

QTY:

Now save save $0.00 $0.00

$2.59
Rating:
Stock:
Weight:
34 g
SKU:
9045000002-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description
The MultiStar 1045 prop was made specifically for Mutli-Rotor use using a slot (DJI) style hub for proper centering and non-slip engagement. The Multistar line of props come in CW and matched CCW rotations and the center hubs are beefed up so no fear of splitting the hub and tossing a blade! They also have a thicker cross-section to minimize flexing and increase their durability. The 1045’s precision molding will allow these props to require very little to no balancing. Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.

Specs:
Size: 10-4.5
rotation: CW
Hub: slot (DJI) style, 8mm bottom Dia  7mm flat to flat and drop down to 6mm top hole

Included:
Two cC
w props
 
Product
Specifications

Additional Information

  • SKU:
    9045000002-0
  • Brand:
    MultiStar
  • Weight(g)
    34.00
  • Length
    270.00
  • Width:
    10.00
  • Height:
    60.00
  • Pitch Y(Inch)
    4.50
  • Material
    Plastic
  • Rotation:
    CCW
  • Unit Weight (g):
    No
  • Type
    Multirotor
  • Blade Count
    2
  • Diameter X(Inch):
    10.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
playlist_add_check Overall
trending_up Value
Like others have said, the DJI slot is too shallow to allow the propeller to fully fit onto the motor shaft. They seem well made and balanced, but they are going to require some modifications to fit onto my motors.
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
trending_up Value
playlist_add_check Overall
de gran calidad, muy resistentes
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
buena callidad y util a la hora de necesitarlas coomprenla
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This product is not sutable for DJI 2212 motors. The slot on propeller is only 3mm deap. And it is not fitting to the end. There is no posibility to put the nut on. I had to drill propeller by 8mm drill to fitt it to the motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Absolutely impossible to balance these props. Bought plenty of them for MT2213-935KV and Quanum Venture drone. Used the best Dubro balancer but still high vibrations. For those who want to dare, your best bet is to use tape instead of sanding, but don't expect you'll make much of a difference once you start using it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These propellers are good quality and are made out of a strong beefy material, they are very solid. However, they are very heavy and due to their weight, the inertial mass of these props makes the motor response very slow...the motor response is so slow that the multirotor flight controller CAN NOT keep the multirotor stable and gives a very bad flight experience. I have tested with other lighter props and the flight characteristics were great. I Would keep away from these propellers if you want a nice flying multirotor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These propellers have a DJI style hub, but they do not fit the DJI 2212-920 motors, so no use on a DJI F450 or F550
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
well done props, little work to balance but nice and strong
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good quality props for multistar motors ordered them for my quanum venture multirotor. props have a little less flex than standard sf props.

really happy with them.





verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice median between flexibility and rigidity. They did require a bit of balancing but other than that. They seem good.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.