Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar Outrunners are designed with one thing in mind - maximizing Multi-rotor performance! The V2 Series have all the same internals and dimensions of their predecessor, and are compatible to be used together if you’re looking for replacements. The difference is the prop mounting features, The V2 now has a removable/replaceable prop shaft for those unfortunate crashes as well as direct bolt options propellers. There will be replacement prop adapters in CW/CWW rotation, available soon
The 2206-2150KV V2 Multistar nicknamed the “Baby Beast”, is the monster motor for the small 250 class Quadcopters! Designed for 5 or 6 inch props, this motor has power on tap, and ready for your fully loaded 250. The motor has been beefed up in all the right places for FPV durability, with 3.17mm center shaft, 11mm prop flange and a 5mm prop shaft, there is no need to worry about the occasional tree in the way. It’s fitted with shimmed and pre-loaded bearings and high grade silicon wires. If you’re looking for more power, durability and value for your sub-300mm multirotor, think…. Multistar 2206 the Baby Beast
Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.
*Note: lower mounting screw length is critical to check. The lowered housing was reduced in height to make a nice compact 2206, the tradeoff is the motor winding is closer to the bottom, so overly long mounting screws could potentially contact the windings and damage the motor.
Lipo cells: 2~4s
Max Power: 120w
Max Amps: 10A
Dimensions(Dia.xL): 27 x 17mm
Motor Shaft: 3.17mm (5mm prop shaft)
Prop shaft: 5mm or Direct mount with 9mm center to center
Bolt hole spacing: 16mm * 19mm
Connectors: 2mm bullet
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Bought a set of 4. 2 out of the 4 were completly defective and burnt out my escs. The other two made a bad noise and were unbalanced. They got hot even with no props on. Straight in the bin.Multistar V2 2206-2150KV Motor The "Baby Beast" (V2) is a beast. It is excellent motor to be use with a 250 racer. The motors perform well. And it is a valve for money motor.so good Multistar V2 2206-2150KV Motor The "Baby Beast" (V2)These are rated for 4S, and one of them burned out. Now I cannot replace it because they are no longer for sale - so the whole set is useless. For some reason I thought these were only rated for 3S, and I would be taking my chances. But stats above clearly say 4S. I had to replace the bearings almost every crash, but that was no big deal. These should have lasted and not melted down on me. It happened in mid flight. One motor stopped and the quad came crashing down. There is some sort of paste or coating that oozed out of the copper windings. Now the motor just stutters when you give it power and starts smoking. It is not seized, you can easily turn it by hand.Malgr les bonne performance des ces moteurs, sur 6 moteurs acheter 3 on des roulement franchement bruillant, et il ne me semble pas que les cloches soit quilibrer, je prfre largement les 2204 2300kv elite, qui sont trs bien quilibrer, ont des roulement de meilleur qualit et des bobinages parfait par rapport au baby beast qui ont des bobines un peu brouillont et sur lesquelle j'en ai meme ou le fil dpasse un peu des bobines, donc baby beast a 13 euros et elite a 15 euros, je prfre sans conteste les modle lites.I am very satisfied with this motor in my mini race quad build. works well with the afro 12A esc.
The speed and thrust is great with the Gemfan 5040 props.
Would definitely buy these motors again! :)small but strong! good for lightweight multirotors.I am running these on 4 cell with 12A afro slims, the esc's get hot but the motors dont even get warm, I plan to swap out the esc's for 20A.Motori molto potenti, perfetti per droni 250- 280 mm con esc Afro ESC 12Amp Ultra Lite
Pultroppo con eliche 5030 non sono efficacissimi, consiglio delle 6030, senza sono meno potenti dei 1806.Great motors, 3 or 4 cell good and over 600g of thrust with 3 blade 6045s, crazy! Best get the box bundle as that is currently the only way to get both (CW/CCW) prop adapters that were promised but still not available to buy individually.