- Overview
-
The Multiwii Lite V1.0 is a gyro/accelerometer based flight controller that is loaded with features. With expandability options and full programmability, this device can control just about any type of aircraft. This is the ideal flight controller for your multi-rotor aircraft.
Features:
• Small size, 35x35mm mounting holes
• 6 input channels for standard receiver and PPM SUM receiver
• Up to 8-axis motor output
• 2 servos output for PITCH and ROLL gimbal system
• Can utilize a servo's output to trigger a camera button
• FTDI/UART TTL socket for debug, upload firmware or LCD display
• I2C socket for extend sensor, I2C LCD/OLED display or CRIUS I2c-GPS NAV board
• Separate 3.3V and 5V LDO voltage regulator
• ATMega 328P Microcontroller
• MPU6050 6 axis gyro/accelerometer with Motion Processing Unit
• On board logic level converterFlight modes:
• Acro
• Self-LevelSpecs:
Dimension: 40x12x40mm
Weight: 9g
Fixing hole spacing: 35mm (It can be changed to 45mm by CRIUS Distribution Board)
Hole diameter: 3mmPackage content:
MultiWii Lite FC x 1
USB program board x 1 (Mini USB cable required but sold separately)
More information can be found on the Multiwii Website.
http://www.multiwii.com - Specs
-
Additional Information
-
Blade Count:
N/A
-
Diameter X(Inch):
No
-
SKU
381000134
-
Watt Hour
0.00
-
Weight(g):
31.00
-
Length:
130.00
-
Width
15.00
-
Height
85.00
-
Blade Count:
- Discussion
-
- Reviews
-
-
Picture is ok, text is not ok. This one doen not use a 6050 and the board is 50x50.
One board is death on arrival. -
I have two of these units and find them easy to use and set up. The ability to update firmware and adjust programming is a great feature once you have all downloads. Arduino and Multi Wii. The Gui is excellent.Self levelling must be activated in Arduino instructions here on this website. Is working great in two quads Talon V2 and home built unit. Great product if your willing to do research.
-
Italiano
Ottima, come tutte le CRIUS, economica e prestante. Tuttavia se con la versione 2.1 di Multiwii tutto funziona a dovere ho un grosso problema con la versione 2.2. In pratica anzich spegnersi quando se ne da il comando tutti i motori salgono di giri di colpo fino a sollevare il multirotore col risultato di avere un incidente sicuro specialmente se si impreparati. Solo dopo vari tentativi di spegnimento i motori si fermano.
Quindi sconsiglio caldamente di caricare la ver. 2.2 di Multiwii, a meno di capire qual' il problema e di averlo risolto.
ENGLISH
Excellent, like all CRIUS, economic and handsome. However, if with version 2.1 of MultiWii all goes well I had a big problem with version 2.2. In practice, instead of turning, while giving this command, all engine climb speed of shot to lift the multicopter with the result of having an accident, dangerous especially if you are unprepared. Only after several attempts to switch off the motors stop.
Therefore strongly advise against loading the ver. 2.2 of MultiWii, unless you understand what the problem and have it fixed. -
Issue with 2.1 config for the sensor on this board. Had to edit sketch and reflash. Great board non the less.
Quad wanted to just flip over, no roll or pitch responce. May be an issue with multiwii 2.1 fw config for the sensors on this board. Sketch edited and reflashed. Works fine. Great little flight controller at a good price. -
THIS IS MY FIRST MULTI ROTOR CONTROLLER. JUDGING BY THE EASE THAT THIS WAS TO PROGRAM AND HOOK UP, THIS WAS ANOTHER TOOL THAT MAKES LIFE EASIER.
-
Works OK but you need to recompile the firmware since pitch and roll sensors are in wrong direction.
Add to def.h:
#if defined(HKING)
#define MPU6050
#define GYRO_ORIENTATION(X, Y, Z) {gyroADC[ROLL] = Y; gyroADC[PITCH] = -X; gyroADC[YAW] = -Z;}
#define ACC_ORIENTATION(X, Y, Z) {accADC[ROLL] = -X; accADC[PITCH] = -Y; accADC[YAW] = Z;}
#endif
and the define this board in config.h -
Unusable due to lack of even basic instructions , for me anyway .
If you don't already know how to set this board up suggest you choose different one . -
This is nice. Get your wii on.
-
Esta placa tem o basico, giroscopio e acelerometro, oque jah eh ohtimo, ainda tem a vantagem de poder agregar mais sensores posteriormente, coisa que a KK2 nao tem.
Existe um forum em portugues com uma galera ohtima que entende muito sobre Multiwii em www.multirotores.com.br
-
- Video
- File
-
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesNo File Name download now [107kb] No File Name download now [107kb] newbies guide download now [452kb] pinouts.lite download now [199kb] pinout connects download now [2420kb] Config Crius V1.0 MPU6050 Gyro and ACC download now [136kb] MultiWii_2.2.1_dev_2013-04-08_mod_by_LeB download now [176kb] MultiWii_2.2.1_dev_2013-04-08_mod_by_LeB download now [176kb] No File Name download now [452kb]
-
-
-
PLANES
-
-
-
AIRPLANE ACCESSORIES
- EDF Systems & Parts
- Wheels/Landing Gear/Retracts
- Spinner/Adapters
- Propellers
- Wires & Connectors
- Heat Shrink / Shrink Tube
- Flight Stabilization Systems
- Horn/Hinge/Clevis
- Screws/Bolts/Nuts/Fasteners
- Covering Film
- Decal Sheets
- Glues, Lubricants & Tape
- Night Flying Accessories
- Push Rods
- Tube, Rod, Carbon Fiber & Glass Fiber
- Pilots
-
-
-
TELEMETRY & FPV
-
-
-
-
-
-
POWER SYSTEMS
-
-
-
-
BOAT ACCESSORIES
-
-
-
-
AERIAL VIDEO
-
-
-
POWER SYSTEMS
-
-
-
-
DIY & ELECTRICAL ACCESSORIES
-
-
-
3D PRINTING
-
-
-
-
AIRSOFT GUN REPLICAS
-
-
-
SCOPES / LASERS / AIMING DEVICE
-
-
Company
Category
My Account
Customer Service
Discount PriceLetter