Designed for serious quad racers and freestyle maniacs, the AfroFlight Naze32 flight controller is undeniably the most used, recognised and supported flight controller in the scene today.
With a 32bit ST micro processor and a host of equally impressive sensors, this Rev6 Acro version comes with 16mbit memory and the BMP280 barometer.
This board also comes with angled header pins and is configurable with baseflight / Cleanflight via the onboard USB connector.
• USB on right side
• PPM/PWM input as through-hole
• Flexible motor outputs, support various airframe types:
Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
• Up to 8 ch RC input - supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spektrum satellite receivers.
• Built in FrSky telemetry inverter
• Battery voltage monitoring
• Modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
• 3.3V, I2C on standard-size headers
• SBUS Inverter built in
• Spectrum satellite
• Sonar pads w/resistors added for direct connection to 5V sonar
• BMP280 barometer
Dimensions: 36x36 mm (30.5mm Mounting)
Weight: 5.3 grams (no headers, 7.3 grams with)
Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line
Naze 32 Rev6 board
4 x sets of pins
1 x RC Breakout cable
Note: Our Naze32 Rev6 boards are hand crafted in a secret location deep inside Mount Tsubakuro by Timecop and his legions of SMT Ninja henchmen. Ok, we made that bit up, but they are the real deal and manufactured in Japan. Support the developer and the hobby, buy genuine!
Classic FC, great for beginners and easy to set up. You wont get the features of other boards like extra UART ports but this is great at the current price ($17 USD).A classic FC, great for beginners and easy to set up. You don't get the features of other boards like extra UART ports but it's pretty good at the current price ($17USD).A classic FC, great for beginners and easy to set up. You don't get the features of other boards like extra UART ports but it's pretty good at the current price ($17USD).A classic FC, great for beginners and easy to set up. You don't get the features of other boards like extra UART ports but it's pretty good at the current price ($17USD).Works very good with betaflight, obviosly after migrate from Baseflight to Cleanflight and after that Cleanflight to Betaflight.Good fc for beginners or freestyleAwesome.. awesome board.. solid and locked in feeling! bought three.
210 frame, 2205/2300 motors, 5040 Gemfan. Turned the little guy into a bullet!I like this board. With clean flight, it's pretty easy to set up and get running. While I miss the total convenience of the KK on board programming, the fact that it supports Horizon mode makes this THE board to learn to flip with. (Horizon lets you flip when your sticks are at their outer limits, but self levels when the sticks are closer to center.) I'm not happy with the barometer; when in use, the quad will jump like it's possessed. If you're looking for GPS and a barometer, you should get something else. If you want a good acro board, this is a good board.I bought one, and the first time that i put the firmware appear "No response from bootloader", I tried to unbrick it, but nothing happens. Just appear No response from bootloader. Rev6 has a lot issues. better rev5.fast shipping and it works great but if your not handy with a soldering iron buy the pre soldered version
Naze32_R6_straight_header.STEP download now [677kb] 201508192315101510.rar download now [2.44Mb] Naze32_rev6_manual_v1.2.part1.rar download now [4.00Mb] Naze32_rev6_manual_v1.2.part2.rar download now [4.00Mb] Naze32_rev6_manual_v1.2.part3.rar download now [4.00Mb] Naze32_rev6_manual_v1.2.part4.rar download now [965.67Kb]