The Sonic FX is an impressive 1000mm flying wing made from ultra-tough EPO foam. The FX offers you all of the performance of its bigger siblings in the Sonic range in an easy to transport size and being Plug and Fly, the Sonic FX will have you in the air in no time.
Practicality was the keynote when designing this airframe and this can be seen right through the model. From the one-piece design to the molded hatch catch for positive locking, the ample cooling vents, pre-fitted XT60 connector and molded hand-hold for launching, the Sonic FX is designed to make life easy!
The state-of-the-art airframe with its low profile twin fins and leading edge strakes not only performs like a pedigree, but looks the part too in its striking hi-viz color scheme.
A pre-installed 2212 2280kv brushless outrunner gives plenty of power for any maneuvers you care to think of with this 3 channel model while letting you push the flight envelope to the limits of high and low speed flight. The glide won't disappoint you either.
All in, the Sonic FX is a fantastic all round fun model with a performance only limited by your imagination (did somebody mention FPV?)
• Ultra-tough EPO foam construction
• Large cooling holes for the battery compartment
• Pre-installed brushless power system and servos
• Fast, agile and aerobatic
• High-viz color scheme
Propeller: 6 x 4
Motor: 2212 - 2280kv Brushless outrunner
ESC: 40A w/BEC & XT60 connector
Battery: 3S 11.1V 2000~2500mAh LiPoly
Servos: 9g x 2
Flying Weight: 530~550g
Sonic FX EPO 1000mm Flying Wing
4 Channel TX/RX with elevon mixing
2000~2500mAh 3S (11.1V) LiPoly battery
Unbedingt vor dem Akku anschließen die Polarität prüpfen, habe zum Glück 2 gekauft, beim ersten war der XT60 verpolt und im Eifer des gefechts habe ich das nicht geprüft und angeschlossen. Motor und ESC haben geraucht, der Lipo brennend heiß.
Fliege die mit SLS-Xtron 3s 2600mAh, der CG passt super, der Akku geht gerade noch rein.
Die original LS extrem unwuchtig, fliege mit 5x5 APC statt der 6x4 die mitgeliefert wurde. Etwas weniger Schub dafür mehr Speed.
Ruder nicht hochstellen sondern bündig lassen, dann passt das Perfekt.
Video vom Maiden: https://youtu.be/qScWO1F97QUI purchased one of these, NOT happy, BOTH SERVO'S failed to work. tried three different receivers, then plugged a spare servo into those receivers, got the guy from budget hobbies capalaba to check the servo's, NOT WORKING, BRAND NEW!. SO, if you have a lot of spare parts at home or you live close to a hobby shop this is the wing for you. I have modified it for FPV, kept the weight on target, ready to FLY.Super Modell flog sofort super mit 2200mah ca 10-20min je nach Flugstill.
Geht Senkrecht hoch mit dem Orginal SetupIst sehr schnell aber einfach zu fliegen mit 65 pcntExpo höhe 80 pcntdualrate 65 pcntExpo 2200mah 3s 30c ca 5 min unter 100pcntvollgas !in 5 min flugfertig TOP!Überlege mir einen 2 ten zu kaufen!!!Maiden flight today and this plane is Amazing! Flew very stable with D/R set to 50pcnt and 50pcnt expo. Way too much throw as it comes out of box stock. I have several Z84 Wings and this is the big brother in my opinion. Very similar handling characteristics if set up with less throw as stated above. I love this plane as is because it's got good speed. Build quality is top notch for the price and it's reinforced at likely impact areas on landing so big plus there. If you like Delta wing planes and have a little experience...Buy one! You will enjoy this beauty.Fun plane. Took less than 5 minutes to setup. It has an awesome sound to it and is nice and fast on the stock setup. It flys nice and stable even at slower speeds, and is easy to launch. I use a 2200 3s nanotech and it fits perfectly. For the price range it would be hard to beat the speed, stability and quick setup. This is my new favorite wing!Hello,
the modell-quality is very high, except the cover is not exactly build in. The wings are very stiff. Next day the maiden will show how it flies.