Prop Drive motors are rock-solid performance s with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory (our) prices! All performance figures are real and tested on our own motor dynos.
Our QC engineers check and balance each motor before shipping to the HobbyKing.com warehouse.
Model: Prop Drive Series 2836 2200
Motor Wind: 7T
Max current: 50A
Max Power: 310W @ 11.1V (3S) / 696W @ 15V (4S)
Cell count: 3s~4s
Bolt holes: 16mm & 19mm
Bolt thread: M3
Prop Test Data:
5x5 - 11.1V / 232W / 20.9A / 0.64kg thrust
5x5 - 14.8V / 516W / 34.9A / 1.021kg thrust
6x4 - 11.1V / 310W / 28.0A / 0.945kg thrust
6x4 - 14.8V / 696W / 47.0A / 1.17kg thrust
Note: An accessory pack is available for this motor. Please see the related items below.
Unit Weight (g)
Max Currents (A):
Length B (mm):
Can Length D(mm)
Total Length E(mm):
Good driving my 1.8kg Alex F5J with reduction 3.7:1 and 15x7 Aeronaut prop (45A at pick).
After 20 run the stator lost home and needed to be re-glued.@hobbyking please add the prop adapter to "ACC" (related items) for ease of combine or bundle purchase
Buy this too I didn't = :(.
http://www.hobbyking.com/hobbyking/store/__24527__NTM_Prop_Drive_28_Series_Accessory_Pack_US_Warehouse_.htmlI put this on my Sky Surfer Pro and it is just great. Im running a 6x4 prop with a 50a esc powered by a 4s battery. I have tried a 4s 2200mah 20c and found it to be a little sluggish compared to a 4s 3000mah 40c which is working out just great. The plane wasn't giving me unlimited vertical but it is definitely not a gentle glider anymore. I would recommend this motor for someone that wants to get more speed out of their Bixler/Sky Surfer. I am finally able to do nice tight loops and rolls. A side note the acc pack has a nice prop adapter.Great upgrade for a Bixler 2. Standard motor on Bix2 is lacking power specially if you fly in windy conditions. The mounting holes on the Bixler 2 motor mount lines up perfectly for this motor using the supplied 4 screws. I used a 6x5 prop as Im using 3s lipo with a 40a Esc I have lying around. Plenty of power, get the Bixler airborn in 1/4 throttle. Dont forget to buy the accessory prop drive pack if you plan to buy this motor.Just flew this on my Bix 3 which was like a rocket ship! Here is my video explaining how i mounted it: https://youtu.be/mh-eOmFpN7YPerfect motor, only no chance to reverse shaft. Better to buy short shaft version or cut of shaft. Need to buy accesosry kit separetly.I have not yet run this motor to full power with a prop on but I ran it up to 5A with a 7x4 master airscrew 2 blade on 3s. very smooth throttle response with an aerostar 50A ESC and the motor really spins up very smoothlyPut this little gem in an EFX Racer kit and she gets up!! Just a few rpms shy of the stock 2300kv 2836 but has just as much power if not more. Running on a 4s 40c 2200 throwing a 6x4 APC pulls 47 amps static. Comes down warm after 4 min flights. Running on a 3s 35c 2250 with the same prop she has more than enough power for the novice flyer as well as being very efficient. Mixed throttle I was getting 7 min flights with each cell at 3.75v(about 35pcnt battery remaining). Very well balanced and tight quality control all around. I have at least 10 NTM motors and every one has been great, this is no exception. Grab one, you won't be disappointed. Don't forget your 28 series accessory pack guys!!!
-tayzeVery powerful motor, great magnets and bearings, wires very resistant.
For me one of the best motor that i bought for now.wonderful motor max power I have found for weight and size
NTM2836-2200 696 NTM28-ACC TGS7x6E CO1 download now [1882kb] NTM2836-2200 696 NTM28-ACC TGS7x6E CO2 download now [1728kb] NTM2836-2200 696 NTM28-ACC TGS7x6E CO3 download now [1483kb] NTM2836-2200kv on AXN w. NTM28-ACC download now [2277kb]