Orange RX Short Range Telemetry Station
Orange RX Short Range Telemetry Station
Copy and Share the Below URL
Looking for an economical replacement telemetry station for your DSM2 / DSMX Telemetry capable radio system? look no further! The Orange RX Short range telemetry station is a super light and compact telemetry receiver that provides the user with real time Current, RPM and Temperature readings of your model.
The telemetry station has a 3.7~9.6v Input voltage and plugs into the telemetry port or any spare channel on your receiver via the jumper cable supplied. All telemetry sensors are connected to the mini molex terminals on the telemetry station.
Features:
• Lightweight and compact design, weighing in at just 6 grams!
• Ideal replacement telemetry station for DSM2 / DSMX telemetry capable transmitters
• Provides real time Current, RPM and temperature readings
Specs:
Operating Voltage: 3.7~9.6V
Dimensions: 33 x 25 x 10mm
Weight: 6g
RPM Range: 0 to 65,500
Flight Pack Voltage Range: 0–50V
Temperature Range: -40°C to 125°C
Range: 300–400 feet
Note: Matching Orange RX telemetry sensors and telemetry modules are coming soon, so be sure to keep an eye on the website!
-
SKU 9171000305-0
-
Brand Orange
-
Capacity (mAh) -
-
Shipping Weight 12.0000
-
Packaging Length 80.00
-
Packaging Width 15.00
-
Packaging Height 50.00
-
ORX Short Range Telemetry Station
Bought 2 Orange telemetry units, looks good and the connection with my TX was easy. Wait with ordereings until the sensors are available! Got the wrong sensors myself which didn't have a jst connector, so I can't hook them up to the balancing lead of my Lipo.
Bought 2 Orange telemetry units, looks good and the connection with my TX was easy. Wait with ordereings until the sensors are available! Got the wrong sensors myself which didn't have a jst connector, so I can't hook them up to the balancing lead of my Lipo.
Very good
Very good
Very good
Very good
Good
Good
The module keeps blinking after binding and doesn't show the voltage of the battery (I have only a voltage censor). What I have done wrong?
The module keeps blinking after binding and doesn't show the voltage of the battery (I have only a voltage censor). What I have done wrong?
Funktioniert, aber leider nicht so komfortabel wie der TM1000:
1. Eine Bindung ber einen Bindestecker (mittels Y-Kabel zwischen Empfnger und Telemetrieeinheit) funktioniert nicht. D.h. zum Binden muss der winzige Knopf an der Telemetrieeinheit gedrckt (und gehalten werden!!!), bis der Bindeprozess beendet ist. Die Einheit muss also immer gut erreichbar sein.
2. Bei fehlendem Temperatursensor wird eine Temperatur von -17 angezeigt.
Funktioniert, aber leider nicht so komfortabel wie der TM1000:
1. Eine Bindung ber einen Bindestecker (mittels Y-Kabel zwischen Empfnger und Telemetrieeinheit) funktioniert nicht. D.h. zum Binden muss der winzige Knopf an der Telemetrieeinheit gedrckt (und gehalten werden!!!), bis der Bindeprozess beendet ist. Die Einheit muss also immer gut erreichbar sein.
2. Bei fehlendem Temperatursensor wird eine Temperatur von -17 angezeigt.
Very happy with this telemetry. we fly over 2 cricket pitches and get about 250m range closer to the ground. When flying the model higher in the air noticed the range in hight is less, probably 150m-200m directly above. The more to the left and right of you the longer the range. Very easy to bind.
Make sure you have the sensors all unplugged before binding and you need to bind the receiver and the telemetry at the same time. so if you have already bind a plane you will need to rebind it with the telemetry.
The bind Button is on the side of the telemetry and need to be held down when you connect the power. if using Spektrum it will say binding DSM# with telemetry.
Very happy with this telemetry. we fly over 2 cricket pitches and get about 250m range closer to the ground. When flying the model higher in the air noticed the range in hight is less, probably 150m-200m directly above. The more to the left and right of you the longer the range. Very easy to bind.
Make sure you have the sensors all unplugged before binding and you need to bind the receiver and the telemetry at the same time. so if you have already bind a plane you will need to rebind it with the telemetry.
The bind Button is on the side of the telemetry and need to be held down when you connect the power. if using Spektrum it will say binding DSM# with telemetry.
Bind button is hidden under a resilient cover.
Everything works on first connection.
Very good buy.
Waiting for the weather at the test range.
Bind button is hidden under a resilient cover.
Everything works on first connection.
Very good buy.
Waiting for the weather at the test range.
| test with DX9 | Download [220] |
| Setup guide for Orange ORX | Download [430] |
| No File Name | Download [831] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!
Combine Essential Items and Save
Others Also Bought
-
Flight Pack Voltage & Temperature Sens...SKU: 9171000551-0
$6.85 -
4Cell Flight Pack Voltage & Temperatur...SKU: 171001284-0
$1.05 -
Current Sensor for OrangeRx Telemetry SystemSKU: 9171000552-0
$19.08 -
XT60 Inline Flight Pack Voltage & Temp...SKU: 171001286-0
$2.34 -
Orange RPM SensorSKU: 9020000008-0
$3.40
Related Products
-
Flight Pack Voltage & Temperature Sens...SKU: 9171000551-0
$6.85