New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

OrangeRX RX3S 3-Axis Flight Stabilizer V2 (V-tail/Delta/AUX)

OrangeRX RX3S 3-Axis Flight Stabilizer V2 (V-tail/Delta/AUX)

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000156
WANT FREE SHIPPING? Click here to find out more!

The RX3S OrangeRX Flight Stabilizer V2 adds support for V-tail & Delta models, it also offers a remote ON/OFF feature that can be controlled via your transmitter's AUX channel. All of these great new features yet it's even smaller/lighter than the original!

Utilizing a single high precision 3-axis MEMS gyro, the RX3S OrangeRX Flight Stabilizer V2 is capable of stabilizing flight on just about any fixed wing aircraft! It provides added stability by automatically correcting the aileron, elevator and rudder channels in flight. This compensates for unwanted changes in the airplane's attitude due to wind and other factors. In short, it makes your airplane much more stable in flight!

The RX3S V2 is great for those who tend to fly in windy conditions, as it will compensate for wind gusts that would normally push your model around. It's also an ideal add-on to your favorite FPV model to keep it on the straight and level while flying.

This unit is very simple to install and use. The adjustable gain settings are pre-set to 50% offering mild stabilization. You can easily adjust the gain for each channel as desired to increase or decrease the compensation for the respective channel (AIL, ELE, RUD).

Because we design, test and manufacture these units completely in-house (from 3D/2D drawing to materials sourcing, final assembly etc.) we can completely control production and ensure product consistency from design right through to shipping the product to you. Also, the removal of middle-men has meant we can drive better value to the market and retail these units at factory(our) prices!

Features:
• Capable of stabilizing flight on just about any fixed wing aircraft (including V-tail/Delta models)
• Remote ON/OFF feature that can be controlled via your transmitter's AUX channel
• Supports 3D flight without undermining stability
• Independent gyro gain adjustment for aileron, elevator and rudder
• Easy-to-access gyro reversing switches on front of unit
• Compact and light weight design

Specs:
IC: Atmega168PA
Gyro: 3-Axis MEMS
Input Voltage: 4.8-6.0V
Signal from Receiver: 1520us
Signal to Servo: 1520us
Size: 44x26x14mm
Weight: 10g

  • SKU 9171000156
  • Brand Orange
  • Capacity (mAh) -
  • Shipping Weight 21.0000
  • Packaging Length 45.00
  • Packaging Width 15.00
  • Packaging Height 35.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This gyro was looking very promising, however the price fooled me. I was shipped the gyro, yes it stabilizes, but there is jitter even at the lowest gain settings. I don't want to fly with this, also it is likely to kill your servos. A bit of a shame really. I think that the jitter may be specific to some radios/receivers, however I havn't tested this so it's a bit of a lucky dip with this product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This gyro was looking very promising, however the price fooled me. I was shipped the gyro, yes it stabilizes, but there is jitter even at the lowest gain settings. I don't want to fly with this, also it is likely to kill your servos. A bit of a shame really. I think that the jitter may be specific to some radios/receivers, however I havn't tested this so it's a bit of a lucky dip with this product.

Excelente estabilizador. Deve ser usado perto do CG para garantir melhor eficincia. Melhor para aeros de 400 a 2000mm. Ajuste de velocidade de resposta simples e direto no equipamento. Recomendo...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente estabilizador. Deve ser usado perto do CG para garantir melhor eficincia. Melhor para aeros de 400 a 2000mm. Ajuste de velocidade de resposta simples e direto no equipamento. Recomendo...

I am sorry, but I have found this product inconsistant and hard to use. I bought three and one works very well. The other two have caused out of control crashes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am sorry, but I have found this product inconsistant and hard to use. I bought three and one works very well. The other two have caused out of control crashes.

Using this on my Bixler 2 FPV platform. Works great to stabilize the plane and the video. Nice unit, compact enough to not take up too much space under the hood. Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this on my Bixler 2 FPV platform. Works great to stabilize the plane and the video. Nice unit, compact enough to not take up too much space under the hood. Highly recommended.

Works well on my FT 3D and Parkzone P51. Allows me to fly in much greater wind. Remember to get the male to male connectors. And, don't go nuts with the gain settings. Just a little correction is all that's needed. Great product!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works well on my FT 3D and Parkzone P51. Allows me to fly in much greater wind. Remember to get the male to male connectors. And, don't go nuts with the gain settings. Just a little correction is all that's needed. Great product!

Purchased a number of these, so far one out of 4 has been DOA

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased a number of these, so far one out of 4 has been DOA

I posted my review earlier, but never saw it on here. Maybe 2nd time the charm. Good stabilizer but AUX on/off feature doesn't work. And yes, I've tried all the "solutions" in Files tab and elsewhere. TX and RX working just fine; it's an issue with the stabilizer. Would be nice to be able to turn it off since that's what what was advertised and what I paid for. Not worth the hassle of sending it back, but a disappointing experience so 2 stars.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I posted my review earlier, but never saw it on here. Maybe 2nd time the charm. Good stabilizer but AUX on/off feature doesn't work. And yes, I've tried all the "solutions" in Files tab and elsewhere. TX and RX working just fine; it's an issue with the stabilizer. Would be nice to be able to turn it off since that's what what was advertised and what I paid for. Not worth the hassle of sending it back, but a disappointing experience so 2 stars.

flashed with the "FlightStab" firmware, this is a very nice stabilizer!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

flashed with the "FlightStab" firmware, this is a very nice stabilizer!

I wish I could rate this higher, as I love the Orange products-I use an Orange T-Six TX, as well as RX. Low rating is due to AUX on/off feature not working (i.e. I can't ever turn the stabilizer off). And before you say anything, yes I've tried all the "solutions" posted in Files section, as well as other suggestions on RC Groups, etc. Nothing has worked, and yes I have implemented all of the proposed solutions correctly. MY TX and RX are working perfectly, so I know it's not that. I may have just gotten a bum unit, but it seems these issues are fairly common with this product version. That said, the gyro/stabilization part works great, although it does draw significantly more power from the battery, and results in shorter flight times and less power. Even so, I like the stabilization a lot. I just wish I could turn it off with the AUX switch, which is a desired feature I paid for.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I wish I could rate this higher, as I love the Orange products-I use an Orange T-Six TX, as well as RX. Low rating is due to AUX on/off feature not working (i.e. I can't ever turn the stabilizer off). And before you say anything, yes I've tried all the "solutions" posted in Files section, as well as other suggestions on RC Groups, etc. Nothing has worked, and yes I have implemented all of the proposed solutions correctly. MY TX and RX are working perfectly, so I know it's not that. I may have just gotten a bum unit, but it seems these issues are fairly common with this product version. That said, the gyro/stabilization part works great, although it does draw significantly more power from the battery, and results in shorter flight times and less power. Even so, I like the stabilization a lot. I just wish I could turn it off with the AUX switch, which is a desired feature I paid for.

Wow, never thought i would use one of these, but just put it into my extra and really happy with it. I flew today in a 20ish mph wind which would normally be differcult for my ability, but loved it. It didnt get in the way of normal flying yust took the bumps out.
Off to buy 3 more to put in a handful of a small edf balsa jet and a 10cell seafury.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow, never thought i would use one of these, but just put it into my extra and really happy with it. I flew today in a 20ish mph wind which would normally be differcult for my ability, but loved it. It didnt get in the way of normal flying yust took the bumps out.
Off to buy 3 more to put in a handful of a small edf balsa jet and a 10cell seafury.

Customer files
MANUAL Flight Stabilizer V2 Download [127]
What is this? Download [969]
InstrPL Download [144]
Aux Plug Function Download [24]
No File Name Download [145]
v2 manual Download [145]
v2 manual Download [145]
AUX ON/OFF SOLVED Download [1]
orange Rx v2 French manual Download [149]
No File Name Download [362]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save