The all new RX3S Flight Stabilizer adds on the original V2 design with integrated OrangeRX DSM2 compatible 6CH 2.4Ghz receiver. This eliminates the need for using a separate receiver in your model, not only making installation more tidy and convenient, but allowing you to simply bind with flight stabilization! The RX3S DSM2 stabilizer provides support for V-tail & Delta models, and also offers a remote ON/OFF feature that can be controlled via your transmitter's AUX channel.
Utilizing a single high precision 3-axis MEMS gyro, the RX3S DSM2 compatible stabilizer is capable of stabilizing flight on just about any fixed wing aircraft! It provides added stability by automatically correcting the aileron, elevator and rudder channels in flight. This compensates for unwanted changes in the airplane's attitude due to wind and other factors. In short, it makes your airplane much more stable in flight!
The RX3S DSM2 compatible stabilizer is great for those who tend to fly in windy conditions, as it will compensate for wind gusts that would normally push your model around. It's also an ideal add-on to your favorite FPV model to keep it on the straight and level while flying.
This unit is very simple to install and use. The adjustable gain settings are pre-set to 50% offering mild stabilization. You can easily adjust the gain for each channel as desired to increase or decrease the compensation for the respective channel (AIL, ELE, RUD).
Because we design, test and manufacture these units completely in-house (from 3D/2D drawing to materials sourcing, final assembly etc.) we can completely control production and ensure product consistency from design right through to shipping the product to you. Also, the removal of middle-men has meant we can drive better value to the market and retail these units at factory(our) prices!
• OrangeRX DSM2 compatible 6CH 2.4Ghz integrated receiver
• Capable of stabilizing flight on just about any fixed wing aircraft (including V-tail/Delta models)
• Remote ON/OFF feature that can be controlled via your transmitter's AUX channel
• Supports 3D flight without undermining stability
• Independent gyro gain adjustment for aileron, elevator and rudder
• Easy-to-access gyro reversing switches on front of unit
• Compact and light weight design
Integrated Receiver: OrangeRX DSM2 compatible 6CH 2.4Ghz
Gyro: 3-Axis MEMS
Input Voltage: 4.8-6.0V
Signal to Servo: 1520us
*Note: User manual available for download located under the "Files" tab below
1) This is not a Spektrum DSM2/X product, nor is it a copy of a Spektrum DSM2/X product.
The Spektrum and DSM2/X brand is a trademark of Horizon Hobbies USA.
2) This is not an underground black market fake Spektrum product. OrangeRx quality is guaranteed.
I wonder if these will be back in stock in the US?Fantastic inexpensive unit! Just follow the instructions! It works great even under severe gust conditions!
This is a piece of crap! I bought it fitted it and never was able to use it, i have it bound to my 9X with an orangerc TX modual and throttle is on ch4 and cannot be changed! all other channels work but my throttle is where my elevator is meant to be and vice versa. Thought it was my tx modual, bought another and nope same problem. Total waste of money. Unless hobbyking want to contact me about this im done with orangerxHoly cxxxp, $3.75au each from the Russian warehouse on special. Dear HK can we have these prices in Oz please.My kids love chasing parachutes dropped from my planes and these stabilizers make it much easier to line up my drops and take my eyes off the plane long enough to make sure the kids have got well clear of the runway before I land.These are very good but you cannot turn it off in flight when you have flaps connected because it will activate the flaps does anyone knows how to fix this? I will keep looking for a way.Work great by my friend, I orgered it in DSM2. I use only DSMXSet too just above min on a Rare Bear funfighter and keeps it rock solid at over 100mph, even removes the torque roll of that powerful little motor, makes flying the bear almost boring.....lolNot entirely impressed with the first range check although very easy to bind and with the instruction manual has the makings of a good product. It's a shame the receiver is not full range so for the price I will hang onto it and use in a park flyer. Unfortunately I wouldn't trust it in my new Extra 260, so will stick with Spektrum DSMXVery good for the price, be carreful to adjust the pot and the way of stabilisation by the switchs, and use double sided tape (2 couch is better) to place it in plane. Do what it's supposed to do!
French Manual download now [275kb] French Manual download now [275kb] Russian Manual download now [384kb] No File Name download now [384kb] manuale ita download now [8kb] OrangeRx RX3S V3 Manuel (PDF).pdf download now [275kb] Manuel FR.pdf download now [275kb] OrangeRX RX3S V3 Manual download now [1009kb] Manual (DE) download now [419kb] RX3S OrangeRX Flight Stabilizer V3 manua download now [1009kb] OrangeRX RX3S V3 User Manual (PDF) download now [1009kb] OrangeRX RX3S 3-Axis Flight Stabilizer w download now [1009kb] Manuale ITA stabilizzatore OrangeRX RX3S download now [209kb] Orange RX Deutsch PDF download now [419kb] Orange RX Deutsch PDF download now [419kb] Receptor-Estabilizador (ES) download now [204kb] MANUAL (SPANISH) download now [204kb] No File Name download now [419kb] 3 Axis Rx Manual download now [1009kb] No File Name download now [1009kb] less Weight 6.8g download now [1.15Mb]