Country
United States
 
Shipped From:

OrangeRX RX3SM Micro 3-Axis Flight Stabilizer w/DSMX Compatible 6CH 2.4Ghz

OrangeRX RX3SM Micro 3-Axis Flig...

The all new RX3SM Micro Flight Stabilizer with integrated OrangeRX DSMX compatible 6CH 2.4Ghz receiver is ideal for Micro models. It eliminates the need for using a separate receiver in your model, not only making installation more tidy and conven...
9171000563-0

Now save save $0.00 $0.00

$14.14
OUT OF STOCK
13g
9171000563-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

The all new RX3SM Micro Flight Stabilizer with integrated OrangeRX DSMX compatible 6CH 2.4Ghz receiver is ideal for Micro models. It eliminates the need for using a separate receiver in your model, not only making installation more tidy and convenient, but allowing you to simply bind and fly with flight stabilization! The RX3SM DSMX compatible stabilizer provides support for V-tail & Delta models, and also offers a remote ON/OFF feature that can be controlled via your transmitter's AUX channel.

Utilizing a single high precision 3-axis MEMS gyro, the RX3SM DSMX compatible stabilizer is capable of stabilizing flight on just about any fixed wing aircraft! It provides added stability by automatically correcting the aileron, elevator and rudder channels in flight. This compensates for unwanted changes in the airplane's attitude due to wind and other factors. In short, it makes your airplane much more stable in flight!

The RX3SM DSMX compatible stabilizer has been designed specifically for use in Micro models, weighing in at a scant 10g only! Works with standard servo connectors, in an end pin configuration, perfect for tight fuselages like discus launch gliders.

This unit is very simple to install and use. The adjustable gain settings are pre-set to 50% offering mild stabilization. You can easily adjust the gain for each channel as desired to increase or decrease the compensation for the respective channel (AIL, ELE, RUD).

Because we design, test and manufacture these units completely in-house (from 3D/2D drawing to materials sourcing, final assembly etc.) we can completely control production and ensure product consistency from design right through to shipping the product to you. Also, the removal of middle-men has meant we can drive better value to the market and retail these units at factory(our) prices!

Features:
• OrangeRX DSMX compatible 6CH 2.4Ghz integrated receiver, simply bind and fly!
• End pin style, standard servo plug pin layout
• Capable of stabilizing flight on just about any fixed wing aircraft (including V-tail/Delta models)
• Remote ON/OFF feature that can be controlled via your transmitter's AUX channel
• Supports 3D flight without undermining stability
• Independent gyro gain adjustment for aileron, elevator and rudder
• Easy-to-access gyro reversing switches on front of unit
• Compact and light weight design

Specs:

Integrated Receiver: OrangeRX DSM2/DSMX compatible 6CH 2.4Ghz
Weight: 7.4g
Size: 47x19x8.75mm
IC: Atmega168PA
Gyro: 3-Axis MEMS
Input Voltage: 4.8-6.0V
Signal to Servo: 1520us
Servo/ESC Connection: End Pin

*Note:
1) This is not a Spektrum DSM2/X product, nor is it a copy of a Spektrum DSM2/X product.
The Spektrum and DSM2/X brand is a trademark of Horizon Hobbies USA.
2) This is not an underground black market fake Spektrum product. OrangeRx quality is guaranteed.

Specs

Additional Information

  • Blade Count:
    N/A
  • Diameter X(Inch):
    No
  • SKU
    9171000563-0
  • Watt Hour
    0.00
  • Weight(g):
    13.00
  • Length:
    60.00
  • Width
    10.00
  • Height
    20.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

I have two of these, and one of them was working fine for a few months, and then one day it just stopped binding. I tried different binding plugs with no luck. No obvious reason, no hard crash, it just stop binding. I put the other one in, and it binds fine, but stabilization effects are minimum even with dials turned to maximum. I think it's a quality control issue. They are just not consistent. You get what you pay for!
This is wary cool for flying wings stabilization is good option but i do not use it much, the range is not the best but for the money it is wary good option. I like it mostly for the price.
Rx came in good condition. The gain is very significant, much better than in the youtube video (youtube ID: UPoFwtcJPFw), guess Hobbyking has addressed this issue with manufacturer. I installed this in skyangel 50mm Mirage, so select model as "normal" instead of "elevon" in my transmitter, select "Delta" in the receiver; the gain direction was off, finally I realized that I need to switch the ch1 and ch2 in the receiver to get correct direction of gain for both aileron(roll) and elevator(pitch). Very pleased at the result and will testfly tomorrow, possibly with more followup comment. Great little product making my twitchy bird more enjoyable to fly.
I've been using these micro flight stabilizers on a number of small to medium size foamies. I've not had any problems with them whatsoever. Just be sure to understand their usefulness in how you plan to use them. The are great for certain size and weight planes but not for others. Do your analysis carefully before you decide to chose any component for your airplane !!!
A little hard to set up, but it still works nice for the price.
Easy to use, compact unit. Impressive range for a micro system.
Works great - easy to handle - perfect price - LIKE
haven't really played with this too much yet, but channels are easily reversible the stabilizers can be adjusted on this reciever, seems like it would be nice for certain builds.
Great little receiver, just wish there was a dsm2 6ch version of this size to go with the t-six orange transmitter..
I'm using this receiver on a small indoor foamy. The 3 axis stabilization is a bonus. It make my lines real smooth
View all reviews
Video
  • ORX RX3SM Receiver

Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
RS3MX Manual download now [4321kb]
Alternative firmware download now [4405kb]

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.