New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

P2632 Brushless Outrunner 3800kv

P2632 Brushless Outrunner 3800kv

Discontinued Product

Please continue searching for a similar product.
SKU:
9031000009
WANT FREE SHIPPING? Click here to find out more!

Spec.
Battery: 2~3 Cell /7.4~11.1V
RPM: 3800kv
Max current: 32A
No load current: 11.1V/3.2A
Internal resistance: 0.036 ohm
Weight: 51g 
Diameter of shaft: 2.3mm
Dimensions: 26mmx32mm

  • SKU 9031000009
  • Brand -
  • Shipping Weight 79.0000
  • Packaging Length 69.00
  • Packaging Width 39.00
  • Packaging Height 39.00
  • Kv(rpm/v) 3800.00
  • Max Current (A) 32.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 11.00
  • Power (W) 330.00
  • Shaft A(mm) 2.30
  • Length B (mm) 27.00
  • Diameter C(mm) 26.00
  • Can Length D(mm) 18.00
  • Total Length E(mm) 45.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Habe es in meinem Super Kinetic 815 verbaut, jetzt ist es eine richtige Spass Rakete.
Dafr habe ich folgende Komponenten verbaut:
- Diesen Motor
- 38er Spinner fr 2,3mm Welle (Robbe)
- 4x HXT500
- 40A Plush
- 1000mAh 3S 45-90C Nano oder 1050mAh Rhino

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Habe es in meinem Super Kinetic 815 verbaut, jetzt ist es eine richtige Spass Rakete.
Dafr habe ich folgende Komponenten verbaut:
- Diesen Motor
- 38er Spinner fr 2,3mm Welle (Robbe)
- 4x HXT500
- 40A Plush
- 1000mAh 3S 45-90C Nano oder 1050mAh Rhino

I purchased this motor to go in a 1/14th scale short course truck and it is great! Lots of power in a very small and light package. Runs very smooth and cool with the HK 45A ESC that I am using. Way more power than I really need and that is on 2S LiPo. This motor and ESC can handle 3S but my driving skills probably can't!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this motor to go in a 1/14th scale short course truck and it is great! Lots of power in a very small and light package. Runs very smooth and cool with the HK 45A ESC that I am using. Way more power than I really need and that is on 2S LiPo. This motor and ESC can handle 3S but my driving skills probably can't!

Little screamer of an outrunner! Tested it on 3S lipo and with HK 50A Boat ESC but found it to start stuttering above half throttle unloaded, not sure if this was because of too high revs without load or the ESC not being able to keep up. Up to the stuttering the response and acceleration was very smooth and lowest run speed is pretty slow, being a 3800Kv motor I did not expect it to be able to run that slow.

Motors will power a 60cm fast-ish patrol boat (dual engine, this will be overpowered...) and a 50cm jet ski (single engine).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Little screamer of an outrunner! Tested it on 3S lipo and with HK 50A Boat ESC but found it to start stuttering above half throttle unloaded, not sure if this was because of too high revs without load or the ESC not being able to keep up. Up to the stuttering the response and acceleration was very smooth and lowest run speed is pretty slow, being a 3800Kv motor I did not expect it to be able to run that slow.

Motors will power a 60cm fast-ish patrol boat (dual engine, this will be overpowered...) and a 50cm jet ski (single engine).

Este motor lo usamos en las deltas volantes...Anda excelente las lleva como una cuchilla voladora!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Este motor lo usamos en las deltas volantes...Anda excelente las lleva como una cuchilla voladora!

Its been a while and I can safely say I must retract my old review .the reason the motor didnt act right was my Fault, weak solder. I resoldered my connections and the motor is Awesome! !!!!!! My combination is turnigy 55 amp trust ESC , 2 cell turnigy nanotech lipo 1600 mah 25 -50 C. and 7X5.5 pusher prop. My plane is an Airhogs Titan converted to rc. With this motor combo, It is great, the motor pushes it straight up, like a rocket.the key to this motor is the battery C rating, this motor ispowerfull, and 20 C lipo holds it back. Highly recommend. Great job HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its been a while and I can safely say I must retract my old review .the reason the motor didnt act right was my Fault, weak solder. I resoldered my connections and the motor is Awesome! !!!!!! My combination is turnigy 55 amp trust ESC , 2 cell turnigy nanotech lipo 1600 mah 25 -50 C. and 7X5.5 pusher prop. My plane is an Airhogs Titan converted to rc. With this motor combo, It is great, the motor pushes it straight up, like a rocket.the key to this motor is the battery C rating, this motor ispowerfull, and 20 C lipo holds it back. Highly recommend. Great job HK.

I've had this motor without testing it for a while. I finished my project cub, and tried motor on the table. Gets very jerky on start up, to 1/16 throttle.after that point it lights up to life. not very good quality. Not worth the hazzle to return for warranty. So I'll oil up bearings and run it until it Dies !! Or it straightens out. Tried my 10 6 prop, too big gets hot. 6 5.5 prop runs cool . So I think I'll get a 7 5 or 76 should be good. I'll write a review when I maiden the plane, and keep you posted. And it's a 2.3 mm shaft diameter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've had this motor without testing it for a while. I finished my project cub, and tried motor on the table. Gets very jerky on start up, to 1/16 throttle.after that point it lights up to life. not very good quality. Not worth the hazzle to return for warranty. So I'll oil up bearings and run it until it Dies !! Or it straightens out. Tried my 10 6 prop, too big gets hot. 6 5.5 prop runs cool . So I think I'll get a 7 5 or 76 should be good. I'll write a review when I maiden the plane, and keep you posted. And it's a 2.3 mm shaft diameter.

Good speed seems durable and powerful. Would love to hear it scream with an Aero prop

My application
Scratch built Coroflute boat 750 Gram launch weight

Engineering
NQD 20mm Water Jet
950 Grams thrust
34 Amps
374 Watts

No water cooling and it survives well in the surf on and off the throttle lots, never gets more than acceptably hot can still be touched ok

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good speed seems durable and powerful. Would love to hear it scream with an Aero prop

My application
Scratch built Coroflute boat 750 Gram launch weight

Engineering
NQD 20mm Water Jet
950 Grams thrust
34 Amps
374 Watts

No water cooling and it survives well in the surf on and off the throttle lots, never gets more than acceptably hot can still be touched ok

Nice little motor I use it in a boat and at 375 Watts 34 Amps gets hot but not to hot.

Driving an NQD jet pump it delivers 950 Grams of thrust

Great value for money cools Ok even in a boat hull easy to water cool being an out runner if required also

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little motor I use it in a boat and at 375 Watts 34 Amps gets hot but not to hot.

Driving an NQD jet pump it delivers 950 Grams of thrust

Great value for money cools Ok even in a boat hull easy to water cool being an out runner if required also

I would request HK to provide correct specifications. The shraft diameter is given wrong. It was 2.2 something when I measured with the calliper it's not 3.175 as specified. I wonder if all the other details provided on this website is correct. Prop adapter won't fit now . People like us ordering from overseas have to wait nearly 20 days to get the stuff . I always make sure I'm if getting the right stuff. Mistakes on the website would only make us loose interest in the hobby.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I would request HK to provide correct specifications. The shraft diameter is given wrong. It was 2.2 something when I measured with the calliper it's not 3.175 as specified. I wonder if all the other details provided on this website is correct. Prop adapter won't fit now . People like us ordering from overseas have to wait nearly 20 days to get the stuff . I always make sure I'm if getting the right stuff. Mistakes on the website would only make us loose interest in the hobby.

Good quality motor, but came with no screws to attach to airframe. The shaft is also small so make sure you take this into consideration before buying props for it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality motor, but came with no screws to attach to airframe. The shaft is also small so make sure you take this into consideration before buying props for it.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!