Parrot AR Drone Propeller Combo (AD09 & AD09R ) (6pairs/bag)

• Overall
• Quality
• Value

Fragile and no thrust

Jan 21, 2021

Very fragile (a gentle tip over from a gust of wind at take off was enough to break one in half at the stem) but worse they have much less thrust than original props even though they look similar (hence the takeoff tipover!) .. drone wouldn’t even ascend past 1 meter with 180g battery (GifFi 2600mah) whereas original props fly fine with this weight. Was worth a try given cheap price but ended up throwing them all out and ordering some original parrot replacements.

• Overall
• Quality
• Value

Propellors fit my AR drone 2.0

Oct 08, 2019

I did not mount them but it is an easy way to find difficult to get spare parts.

• Overall
• Quality
• Value

Customer Rated

Sep 26, 2014

Pro:
- not expensive
- do the job fine

Contra:
- need to be straitened & balanced first!
- very stiff material witch tends to explode on impact to easily
- imprecise shaft holes, most are to tight

• Overall
• Quality
• Value

Customer Rated

Feb 13, 2014

The quality is good, good packing and best price. Overall is best buy, recommend it...





 

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 15, 2013

Good to keep extra of these. You never know when you might need them.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 11, 2013

Mucho ms baratas que las originales

• Overall
• Quality
• Value

Customer Rated

Sep 09, 2012

Needs slight modification for a perfect replacement propeller.



Pros- Cheap, Lighter, Slightly better looking design, Labelled for direction placement.

Cons- Parts of the blades need filing and sanding, the centre shaft needs to be drilled out very slightly for better fitment, not all are balanced



In summary, you get what you pay for. Good for enthusiasts that know what needs to be done.

• Overall
• Quality
• Value

Customer Rated

Sep 09, 2012

Bargain pricing though an unfinished product.

As other reviewers have mentioned, the blades require some filing and sanding to remove excess plastic from the moulding or extrusion process.

Also centre shafts are a slightly smaller bore compared to OEM propellers causing a tighter fit and putting unecessary drain on the motors/battery. Good for the experienced flyer that knows how to modify/correct to suit. Great as spares!

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 17, 2012

Stronger than the stock prop, a must have, there is a definete jump in performance of my Parrot ARDrone

• Overall
• Quality
• Value

Customer Rated

Aug 08, 2012

These props, while representing a significant savings on original Parrot props, are not as resilient.

I would only recommend these to accomplished flyers as they do not survive being knocked around at all. I have just completed my MuriMod and decided to swapout the originals for these. As part of the mod I have had to fly naked as it were. I should not have bothered with these props. While making adjustments and practising using the mod i managed to completely shatter 2 sets of these blades with knocks to trees and coffee tables that the original props would have shrugged off without shattering into little pieces.

Again, great price, but for experienced, non crashing pilots only!

Also these are a tight fit on to the shafts compared to original blades which just slide on and off with no force. These props need a firm press or pull to install or remove.