HobbyKing 3D Printer Filament 1.75mm PLA 1KG Spool (Bright Blue)
HobbyKing have come out with a huge new range of 3D Printer Filaments at prices that will have you printing all day and all night.
The range covers PLA, ABS, Flexible, Color Changing, Luminous, Nylon, Polycarbonate, Acetal (POM), Metal Composite and even a water soluble filament for printing molds. So there is a filament for every project you have in mind. HobbyKing filaments have a stable melting point, good round shape and most importantly a 0.05mm uniform diameter tolerance for a consistent flow rate.
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when subjected to flexing, impact or torsional loads so the mechanical needs of the print project need to be evaluated.
PLA has a huge range of vibrant colors and opacity for that perfect look whether it is artistic or utilitarian, in short a great material for 3D printing. PLA can be printed without the use of a heat bead, and can stick to glass or a PCB plate with a binder such as hairspray or white glue for a curl free print.
3D printing is a fun and exciting hobby with a wide range of uses from prototyping parts to making toys for the kids. Picking the right filament for your application is very important.
• Stable melting point
• Good round shape
• Uniform diameter tolerance 0.05mm
• Consistent colors
Filament Material: PLA
Melting Point: 200°C
Print Temperature: 210-235°C
Filament Diameter: 1.75mm
Color: Bright Blue
This filament works well, good value for money.
Extruder temp of 195 degrees and bed at 40 is working for me.Used on CR-10S
I've tried manies temperatures(195, 220; 225, 230) for nozzle and bed (60, 65°C) and still have quality(under feeding ?) issues with this one, bed sticking even with all known tricks, ghosting. Only little pieces are ok where with others Hobbyking Pla Filaments I have no problem. Will try again and again(nozzle temp) till it doesnt remains any cm on the spool.
IGot nice print with this filament. Very good for product for this money!Im new in 3D prining, and this hobbyking PLA was my first filament. And Im verry happy with this product! Listen my advice, and dont blame filament fro bad print, before you dont callibrate your printer.