New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Power HD Fast Digital Metal Gear Servo 56g/11.8kg/.13sec

Power HD Fast Digital Metal Gear Servo 56g/11.8kg/.13sec

Discontinued Product

Please continue searching for a similar product.
SKU:
HD-DS120M
WANT FREE SHIPPING? Click here to find out more!
Model: HD-DS120M
Voltage: 4.8~6.0v
Speed: 0.13~0.11sec
Torque: 11.8~12.8kg/cm
Weight: 56g
Size: 40.7x20.5x39.5mm
 
Although this servo can work on a voltage of 7.4v, it is not a HV servo. It cannot be run at full load on 7.4v and cannot be used on voltage above 7.4 such as 8v (2S fully charged)
  • SKU HD-DS120M
  • Brand -
  • Shipping Weight 101.0000
  • Length 0.00
  • Width 0.00
  • Height 0.00
  • Torque(kg)(min. 0.01kg) 11.80
  • Speed (Sec/60deg) 0.13
  • A(mm) 46.00
  • B(mm) 41.00
  • C(mm) 42.00
  • D(mm) 21.00
  • E(mm) 56.00
  • F(mm) 29.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bought four of these two failed on 20cc plane one on rudder and one on aileron would not center good after about twenty flights will not buy anymore

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought four of these two failed on 20cc plane one on rudder and one on aileron would not center good after about twenty flights will not buy anymore

SERVANT THAT IS A WASTE, NOT PROVIDE, IN PUT SBACH 342 PILOT, FLIGHT AND DID A BROKE THE SERVANT OF AIELERON do not recommend ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

SERVANT THAT IS A WASTE, NOT PROVIDE, IN PUT SBACH 342 PILOT, FLIGHT AND DID A BROKE THE SERVANT OF AIELERON do not recommend ...

Comprei estes servos para a bailarina de meu helicoptero TZ-V2-50. Excelentes, comprei mais 4 para um helicoptero com fuselagem a gasolina, e agora espero ansiosamente por mais em estoque. Necessito mais 3 para um ElyQ-50. Recomendo! No usem sem UBEC !

I bought these servos for my TZ-V2-50. They are superb. I bought 4 of them for a fuselages gas helicopter, and now I cant wasit for them to be re-stocked. I need 3 more for a new ElyQ-50. I reccomend them, BUT DO NOT USE THEM w/o UBECs.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Comprei estes servos para a bailarina de meu helicoptero TZ-V2-50. Excelentes, comprei mais 4 para um helicoptero com fuselagem a gasolina, e agora espero ansiosamente por mais em estoque. Necessito mais 3 para um ElyQ-50. Recomendo! No usem sem UBEC !

I bought these servos for my TZ-V2-50. They are superb. I bought 4 of them for a fuselages gas helicopter, and now I cant wasit for them to be re-stocked. I need 3 more for a new ElyQ-50. I reccomend them, BUT DO NOT USE THEM w/o UBECs.

Nao recomendo comprei 5 desses e conforme o pack que eu uso ele fica se mexendo sozinho ao mandar um comando pra ele usei 3 packs diferentes usei lipo com back em 4,8 e 6v usei nicd de 6v de 1700 amperes especifico pra aviao a gasolina e nao deu certo ai usei pack de 900 amperes nicd tipo pequena e tambem nao deu, usei nhmih tambem ficou ruim, pra ter ideia ao usar uma extensao em y um dos servos nao liga, dai se vc desconetar e conectar o servo ele volta a funcionar..porem muito rapido e barulhento. nao comprem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nao recomendo comprei 5 desses e conforme o pack que eu uso ele fica se mexendo sozinho ao mandar um comando pra ele usei 3 packs diferentes usei lipo com back em 4,8 e 6v usei nicd de 6v de 1700 amperes especifico pra aviao a gasolina e nao deu certo ai usei pack de 900 amperes nicd tipo pequena e tambem nao deu, usei nhmih tambem ficou ruim, pra ter ideia ao usar uma extensao em y um dos servos nao liga, dai se vc desconetar e conectar o servo ele volta a funcionar..porem muito rapido e barulhento. nao comprem.

comprei 5 desses servos sendo que um queimou fazendo testes :s ainda nao voei cm eles perdi a confiana se pudesse voltar a atras nao compraria iria em hitec

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

comprei 5 desses servos sendo que um queimou fazendo testes :s ainda nao voei cm eles perdi a confiana se pudesse voltar a atras nao compraria iria em hitec

servo avec bon retour au neutre

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

servo avec bon retour au neutre

excellent servo machine. installed on my ofna x2-crt. works great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent servo machine. installed on my ofna x2-crt. works great.

This servo is preaty strong and fast, for a very interesting prices.
It makes some nose when powered.
I used it in my car this last 3 month and it was quiet good before it brake.
I have opened it, the gears are ok. but somehow it seems the motor ans the electronic doesn't work out.
if you are looking for reliability this porduct is not for you.
But if for occasionnal modeling, with strong requierement its good price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This servo is preaty strong and fast, for a very interesting prices.
It makes some nose when powered.
I used it in my car this last 3 month and it was quiet good before it brake.
I have opened it, the gears are ok. but somehow it seems the motor ans the electronic doesn't work out.
if you are looking for reliability this porduct is not for you.
But if for occasionnal modeling, with strong requierement its good price

otimo servo, muito preciso, tenho usado no meu giant.....estou satisfeito

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

otimo servo, muito preciso, tenho usado no meu giant.....estou satisfeito

For a reason unknown to me, the servo head is larger than standard.
It still has a 25t head, but your standard servo horns just won't fit.

You either stick with the supplied servo horns (which s*ck, at least the one for cars, as it is toooooo thin and weak)

OR you'll sacrifice one of your standard plastic servo horns and force it onto the head.

The head teeth will make their very own pattern into the servo horn, be larger than standard in the end, so you won't be able to use that specific servo horn with other servos later.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For a reason unknown to me, the servo head is larger than standard.
It still has a 25t head, but your standard servo horns just won't fit.

You either stick with the supplied servo horns (which s*ck, at least the one for cars, as it is toooooo thin and weak)

OR you'll sacrifice one of your standard plastic servo horns and force it onto the head.

The head teeth will make their very own pattern into the servo horn, be larger than standard in the end, so you won't be able to use that specific servo horn with other servos later.

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save