Power HD TR-4 Digital Micro Waterproof Servo w/Metal Gears 2.6kg/0.10sec/16g
Power HD TR-4 Digital Micro Waterproof Servo w/Metal Gears 2.6kg/0.10sec/16g
Awesome!
Copy and Share the Below URL
Power HD servos are reknown for build quality and reliability, the TR-4 micro digital waterproof servo is no exception. This servo is perfect for smaller models such as crawlers, buggies, trucks, boats and even water/float planes where waterproofing is necessary. The case is sealed with rubber gaskets and O rings and the gear train is metal except for one sacrificial plastic gear. This helps stop permanent damage being done to the servo in the case of a really hard knock. The servo is supplied with 2 x single arm output horns and an M3 servo horn screw.
Features:
• Waterproof
• Metal gear train
• Digital amplifier
• Fast and reasonably powerful
• Perfect for scale crawlers, buggies, trucks and boats
Specs:
Type: Power HD TR-4 Digital Micro Waterproof Servo
Voltage Input: 4.8V~7.4V
Speed @ 6V: 0.12sec/60°
Speed @ 7.4V: 0.10sec/60°
Torque @ 6V: 2.2kg-cm
Torque @ 7.4V: 2.6kg-cm
Stall Current @ 6V: 550mA
Stall Currect @ 7.4V: 700mA
Idle Current: 5mA
Travel: 170°
Gears: Metal + 1 plastic
Output Spline: 25T Ø 5.8mm
Amplifier: Digital
Length of Connector Wire: 350mm (26AWG)
Connector: JR type
Dimensions: 25x24.1x13mm
Weight: 16g
Supplied:
1 x Power HD TR-4 Digital Micro Waterproof Servo w/Metal Gears
2 x Single Arm Servo Horns
1 x M3 Servo Horn Screw
Please note: You will find the full specification sheet under the "Files" tab.
-
Servo Torque(kg)(min. 0.01kg) 2.60
-
Servo Speed (Sec/60deg) 0.10
-
Servo A(mm) 28.50
-
Servo B(mm) 25.00
-
Servo C(mm) 24.10
-
Servo D(mm) 13.00
-
Servo E(mm) 29.80
-
Servo F(mm) 16.10
| TR-4 Full Specs Sheet | Download [482] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!
