PowerBox Competition w/ Sensor Switch (OLED Version)
PowerBox Competition w/ Sensor Switch (OLED Version)
Copy and Share the Below URL
The PowerBox Competition is the latest innovation from PowerBox Systems. The PowerBox is a modern power supply system which contains all the electronic components required by today's high-end receivers, servos and models. Every component needed for a totally secure airborne power supply, including IC's, micro controllers and electronic circuits have been duplicated ensuring redundancy, safety and most importantly peice of mind for your investment. The current version of the PowerBox Competition unit includes an integrated graphic OLED screen.
Features:
High resolution graphical OLED screen with 128x64 pixels
Programming procedure using the SensorSwitch in conjunction with the OLED screen
Signal amplification for a total of 12 channels and 18 servos
4 match channels with 2 servos for each channel
Double regulated output voltage
Energy consumption, voltage- and residual capacity display in mAh for both batteries
Sockets for telemetry bus systems
Multiplex MSB and Spektrum
Data feedback by downlink - i.e. for data such as voltage, consumption and residual capacity for both batteries
Selectable servo voltage of 5,9V or 7,4V
Minimum value memory displays voltage collapses in flight
Large area heat-sink area for heat dissipation and even higher performance
Supports three battery types: NiMh/NiCd, LiFePo
Suppression of servo feedback currents
Specification:
Operating voltage: 4,0 Volts to 9,0 Volts
Power source:
2 x two-cell LiPO batteries 7,4 Volts
2 x five-cell NiCd or. NiMH batteries
2 x two-cell LiFePo batteries 6,6 Volts (A123)
Current drain:
Power-on state approx. 130 mA
Power-off state approx. 15 µA
Dropout voltage: approx. 0,25 V
Max. receiver and servo current: 2 x 10 A (stabilised), 2 x 20 A (Peak - Dependant on cooling)
Servo signal resolution: 0,5µs
Signal frame rate: User variable - 9ms, 12ms, 15ms, 18ms, 21ms
Screen: OLED 128 x 64 pixels, graphic
Bus systems: Spektrum, Multiplex
Servo sockets: 18 sockets, 12 channels, 4 of them match-channels
Temperature range: - 30 °C to + 75 °C
Dimensions: 110 x 72 x 24 mm (incl. base plate)
Weight: 115 g
SensorSwitch: 15 g
EMV approval: EN 55014-1:2006
CE approval: 2004/108/EG
