Prop adapter w/ Alu Cone M6x4mm shaft (Grub Screw Type)

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 08, 2013

Facil de montar e bem equilibrado

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 17, 2013

Einwandfrei Qualitt - optimaler Rundlauf - Spitzenpreis

• Overall
• Quality
• Value

Customer Rated

Jul 30, 2012

I bought four of these and none of the end cones appear to be balanced/centered. The adapter part however can still be used with an M6 nut and the included washer.
Both 12x4.5 SF and APC Style 14x7 props fit really well then.

• Overall
• Quality
• Value

Customer Rated

Mar 14, 2012

This adapter is as good as the best ones available. Well and accurately machined. The shaft hole is so tight it fits like a glove and two grub screws will keep it on. Request: Please produce a version of this with 24 mm long prop shaft!!!

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 09, 2012

The hole for motor shaft is slightly bigger than 4mm and because grab screws are NOT opposite to each other adapter is not sitting straight on the shaft. It has small bank towards side where screws are. Excluding this quite nice adapters.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 24, 2011

particularly suitable in motor Turnigy C3530 i have a .. I recomeded Prop adapter w / Alu Cone M6x4mm shaft (Grub Screw Type) motor rotation so stable .. and the driving force to be strong .. good luck

• Overall
• Quality
• Value

Customer Rated

Apr 27, 2011

Quality seems good but I could never get the grub screws tight enough.. I am going to try "colet" type next time ..

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 10, 2011

Sauber verarbeitet, guter Rundlauf, bin zufrieden!

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 02, 2011

This is a good adapter for the price. I do like the grub screw type because I often have to change props on 3d training. And those stay where they are if you remove the cone.

• Overall
• Quality
• Value

Customer Rated

Nov 15, 2010

Pretty beefy and appears machined pretty true. Ill be using it in a airplane with a APC 4.1 x 4.1 prop turning just over 30,000 RPM