Made from strong EPO foam the Pusher Star is an ideal training aircraft. The gentle flight characteristics and a rear pusher prop make flying and landing easy for beginners. The Pusher Star also features a full set of control surfaces (Ailerons, Elevator and Rudder) so you can start learning all the basic controls without any need to modify the model. The included 2210-1900kv motor and 30amp ESC provide plenty of power and all servos are pre-installed making assembly quick and easy. The Pusher Star Also features LED lights on the fuselage and wing tips. All that is required to complete this model is your own transmitter and receiver (Tx/Rx) and a 11.1v 1300mah 3s 20c Lipoly battery.
Wing Span: 1000mm (39.37in)
Fuselarge: 1080 mm (42.52in)
Flyign weight 620g
Motor: 2210-1900kv Brushless (Included)
ESC: 30A (Included)
Servo: 4 x9g (Included)
Battery: 11.1v 1300mah 3s 20c Lipoly (Required)
Battery: 11.1v 1300mah 3s 20c Lipoly
Your own Tx/Rx
Thought this was going to be a good learner BUT was not right . She s abit of a pig , abit heavy , not such a good learner . not top of the range for the money . but might be a good plane for you , you never knowFast build.
I removed the wing flash leds.
I didn't test it yet.I have made four flights with this one. Please keep in mind that you have to change all of stock-items before your first flight. (ESC, 1900kv outrunner, 4 servos)