Looking to make your quadcopter stand out from the crowd? The Quanum Quadrotor Multi-Axis Navigation LED Light System is just what the doctor ordered! This super bright lighting system has been developed to aid navigation with its dual colour LED lights and flash module.
The multi-axis light system plugs directly into a spare channel of your receiver and can be assigned to a switch to allow you to flick through several configurations including, turn off/on, rapid, slow and medium flash intervals etc. Alternatively you can adjust the lights to be illuminated permanently making the system great for night flying.
• Multi-axis super bright LED lighting system
• Dual colour LED's with central flashing module
• Simple and easy installation, plugs directly into your receiver
• Multiple flash configurations or permanent light settings
• Great for night flying action
Light Cable Length: 600mm
Module Cable Length: 300mm
Max Input Voltage: 7.4v
Lighting Type: LED
2 x red LED lights
2 x white LED lights
1 x flash module
4 x cable ties
Works ok on 5-6v. You need an aux chanel for on-off or change the mode of flash.
Have someone tried it powered with 2S ( 8.4v )???
My rx is powered with 2s and don't want to put a BEC.One of the cheapest device I bought for my f450 quad. I had to resolder most connetors after recieved it, was still not working properly, trashed them after! Avoid these ligths and buy led strips.I just plugged it on my battery channel and nothing happened, they are broken I guess...Bought these because I wanted to look like real plane beacon lights, not a flying circus of different colored lights that is hard to tell your heading. very easy to set up on an extra receiver channel which can be switched for different modes, very cool lights and super bright. i put white in front, red in back.Really interesting LED for a quad. The quality of the solder on the LED board are bad. I had to re-solder the 4 LEDFonctionne sous 5V. Pas de documentation pour connaître les différentes valeurs de mode de fonctionnement.
Works under 5V. Non documentation inside box in order to parameter sequences.I was skeptical when I purchased this product but I am very happy with this purchase. It was easy to set up and very visible even during the day. Just plug into an extra channel on your receiver and use the switch to toggle through the different settings with the last setting leaving the lights on all the time. I would buy again.