New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Quanum Carbon Fiber Propeller 14x4.7 (CW/CCW) (2pcs)

Quanum Carbon Fiber Propeller 14x4.7 (CW/CCW) (2pcs)

Shipped From:
  • Global
QTY:

Now save save $0.00 $0.00

$10.76
Status:
In Stock
Weight:
72 g
SKU:
505000047-0
WANT FREE SHIPPING? Click here to find out more!

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

As supplied these propellers are ready to fit a 6mm shaft but this can be reamered to suit shafts up to 10mm, adapters for a 5mm shaft are also included.

Specs:
Length: 14 inch
Pitch: 4.7 inch
Mounting Hole Diameter: 6mm
Hub Thickness: 7.5mm
Weight: 24g each
Rotation: Clockwise and counterclockwise

  • SKU 505000047-0
  • Brand Quanum
  • Shipping Weight(g) 72.00
  • Length 380.00
  • Width 20.00
  • Height 75.00
  • Diameter X(Inch) 14.00
  • Pitch Y(Inch) 4.70
  • Rotation CW/CCW
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I must say, these props are pretty disappointing. I purchased 4 sets and 3 of the props have noticeable ridges on the underside of the prop, in what appears to be a molding issue when they were fabricated. The outer hub diameter is only 13mm which does not provide a lot of surface area for the self-tightening prop hardware to grab onto. Additionally, because the hub diameter is so small, there is not a lot of strength to support the blade, resulting in a lot of vertical flex in the prop near the hub. After a minor tip over on one landing, one blade snapped off right at the hub. I dont recommend these props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I must say, these props are pretty disappointing. I purchased 4 sets and 3 of the props have noticeable ridges on the underside of the prop, in what appears to be a molding issue when they were fabricated. The outer hub diameter is only 13mm which does not provide a lot of surface area for the self-tightening prop hardware to grab onto. Additionally, because the hub diameter is so small, there is not a lot of strength to support the blade, resulting in a lot of vertical flex in the prop near the hub. After a minor tip over on one landing, one blade snapped off right at the hub. I dont recommend these props.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!