We’ve listened to the users of our extremely popular Quanum DIY FPV Goggles V2 and incarnated many changes into the Quanum DIY FPV Goggles V2Pro set.
Our latest version of the Quanum DIY FPV Goggles follows on from the successful version 1 and version 2 goggles and incorporates some major changes, such as adjustable 3 position head straps to make wearing the V2Pro more comfortable than ever before, re-designed, lighter neoprene support glove with integral storage pockets for rear mounted battery, FPV video receiver and head tracker components. With a longer focal plane and new curved clear acrylic optics hour glassing and distorted edges found when using larger LCD screens and Fresnel type lenses will be a thing of the past. These new lenses can be assembled into their custom frame individually as well as back to back to increase magnification rates.
The newly manufactured monitor housing will make your immersive experience even better due to its re-contoured face cut-out with spacing for your nose and even glasses. The neoprene glove and better custom cut out areas for facial contact on the housing assist in making a light tight seal.
Imaging is done by an 800 x 480 super pixel display, and of course non-blue screen monitor.
• New design can be used with glasses
• Extra comfortable sponge rubber cushioning strips for facial comfort
• 5” TFT monitor
• Longer focal plane range
• Clear acrylic lens set (1X, 1.25X and 1.50X magnification) for a superior FPV experience
• Focal length adjustment
• Lightweight EPP foam goggle case, designed for face fitting
• Lighter Multi-purpose Neoprene goggle glove with pockets for Head Tracker, camera switcher fully adjustable top and side head straps, rear battery pouch and enlarged Rx pocket
• Adjustable loops for wire management
EPP Foam goggle case size: 162mm x 170mm x 102mm
Neoprene goggle glove size: 300mm x 230mm
Neoprene glove colour: Black
5” TFT monitor resolution: 800 x 480 pixels
Format: PAL/NTSC supported
Supply Voltage: 7 ~ 13V
Focal Length Adjustment: Clear Acrylic Lens set (1x, 1.25x and 1.5x magnification)
Quanum DIY FPV V2Pro Goggle Kit, Glove and Monitor
1x5521 DC Jack to 1x5521 DC Plug, 2x3315 DC Plug (60mm)
1x5521 DC Jack to 1x5521 DC Plug, 2x3315 DC Plug (350mm)
3.5mm 4P phone jack to RCA female
3.5mm 4P phone jack to RCA male
XT60 male to FPV DC jack (Length = 210mm)
*Note: This is the viewing goggles only, and needs to be paired with your favourite Video receiver, transmitter, camera and battery for the full FPV experience.
The sole flaw with this product is the amount of time required to properly fit the foam to your face - and I am only having trouble due to my large nose. It provides a good quality viewing experience for an unbeatable price. The screen alone is worth the purchase.
A tip: The interior foam of the goggles can be smoothed down with fine sandpaper to allow the lenses to slide smoother and for a slightly easier fit on the face. I absolutely recommend this product for anyone looking to get into FPV.Nice cool staff ,, sooooo like it .... and good quality pct. also good if U have glassesI got it for 29 euro...easy to put together, nice picture. Little bit heavy but if you put the battery to the back it isnt bad.
This is my first FPV kit and i like it. Specially for that moneyI just received my goggles. Very comfortable and love the new lenses. I had the previous one and was happy but this one is perfect. So much storage space for all the equipment. Love it!This goggles are easily the cheapest you can get, while still getting good video/build quality.
It did take a bit more foam than I would like to have a good feel on my face.love these goggles big view angles quality lenses and, awesome comfort. I'll never go back to fatshark.Really good product, it is easy to set up and use! Due to its DIY style you can do some changes on it to perfectly match your needs! The screen is great that you get for it and you can use it as a standalone display and this is insane! I can only recommend it to everyone!The package contains this really cool 800x480px screen, which is already very useful on its own. And even the FatShark Dominator 300+ dollar googles don't have a higher resolution. Using a little bit of hot glue and cable tie, you can assemble the goggle in under ten minutes. As receiver I use the RC832 which works totally fine! Video and power adapters are delivered in this package. Considering that this artictle costs less than 30€ with free shipping, it's the best thing I have ever bought from HobbyKing.Super product. Easy to assemble and a very nice fit. comes with 3 glass lenses og many dif. power cables. Different kind of foam for est fit. It has the battery in the back for better balance.i decided to upgrade from my Quanum V1 Goggles to this V2 Goggles and i'm happy i did it.
i think you will not get anything better for this price. Very comfortable to wear.
I've tried some more expensive goggles like fatshark or similar, but my sensitiv eyes began to hurt after 10minutes. but not with this one. My eyes didn't hurt even after a few 15minute flight's.
QuanumDisplayExtension_1.jpg download now [340kb] Anti-fog fan 1 download now [755.56Kb] Anti-fog fan 2 download now [603.54Kb] Anti-fog fan 3 download now [603.54Kb] Anti-fog fan 4 download now [723.82Kb] User manual download now [1.33Mb]