Quanum MT series motors are Spec built by DYS, well known in the industry for their quality and performance.
The MT line uses quality NMB bearings, high pole counts for torque and smooth operation and all have standardized universal mountings in their given size. Quanum has spec’d the motors with N42sh magnets and .2mm laminations for optimal efficiency. The MT’s also have ample motor wire length for a cut to fit installation, with included bullet connectors and shrink tube. Another great feature is that Quanum spec’d all the motors to come with mounting hardware in various lengths, as well as both hub and direct mount propeller options, so installation is a snap.
Each Quanum motor is QC checked for balance, wind, performance and mechanical tolerance. The DYS brand is well known for their BE series and the new spec built MT line will set new standards of value vs performance.
Features:
• High Power N42sh magnets
• Precision NMB bearings
• .2mm laminations for optimal efficiency
• Ample cut to length motor wires for a clean install
• Direct mount propeller or Hub style compatible
• Multi-length mounting hardware included
Specs:
KV(RPM/V): 2000KV
Lipo cells: 2-3S
Max Power: 84.4W
Max Amps: 7.6A
No Load Current: 0.6/11.1V
Internal Resistance: 0.98ohm
Number of Poles: 14
Dimensions(Dia.xL):28 x 17mm
Motor Shaft: 2mm
prop shaft: 5mm CW prop adapter
Weight: 33g
bolt hole spacing: 16*19 M3
Lamination thickness: 0.2mm
Magnets: 42SH
Wire: 18AWG
Connector: 3.5mm bullet
PROP Power/PWM Voltage (V) Current (A) Thrust (gf) RPM
6x4.5 STD 10 11.1 0.44 27.15 3451
6x4.5 STD 25 11.1 2.62 163.01 8336
6x4.5 STD 50 11.1 6.66 349.5 12040
6x4.5 STD 75 11.1 13.53 571.3 15409
6x4.5 STD 100 11.1 15.74 633.98 15935
6x4.5 STD 10 14.8 0.59 44.33 4449
6x4.5 STD 25 14.8 3.7 260.26 10489
6x4.5 STD 50 14.8 9.75 549.91 14962
6x4.5 STD 75 14.8 20.28 874.48 18361
6x4.5 STD 100 14.8 22.45 914.19 18943
