Quanum MT Series 2208 1800KV Brushless Multirotor Motor Built by DYS
Quanum MT Series 2208 1800KV Brushless Multirotor Motor Built by DYS
Copy and Share the Below URL
Quanum MT series motors are Spec built by DYS, well known in the industry for their quality and performance.
The MT line uses quality NMB bearings, high pole counts for torque and smooth operation and all have standardized universal mountings in their given size. Quanum has spec’d the motors with N42sh magnets and .2mm laminations for optimal efficiency. The MT’s also have ample motor wire length for a cut to fit installation, with included bullet connectors and shrink tube. Another great feature is that Quanum spec’d all the motors to come with mounting hardware in various lengths, as well as both hub and direct mount propeller options, so installation is a snap.
Each Quanum motor is QC checked for balance, wind, performance and mechanical tolerance. The DYS brand is well known for their BE series and the new spec built MT line will set new standards of value vs performance.
Features:
• High Power N42sh magnets
• Precision NMB bearings
• .2mm laminations for optimal efficiency
• Ample cut to length motor wires for a clean install
• Direct mount propeller or Hub style compatible
• Multi-length mounting hardware included
Specs:
KV(RPM/V): 1800KV
Lipo cells: 2-3S
Max Power: 138.8W
Max Amps: 12.5A
No Load Current: 0.8/11.1V
Internal Resistance: 0.43ohm
Number of Poles: 14
Dimensions(Dia.xL): 28*24mm
Motor Shaft: 3mm
prop shaft: 6mm CW prop adapter
Weight: 40g
bolt hole spacing: 16*19 M3
Lamination thickness: 0.2mm
Magnets: 42SH
Wire: 18AWG
Connector: 3.5mm bullet
-
Kv(rpm/v) 1800.00
-
Max Current (Motor) (A) 13.00
-
Resistance (mh) 0.00
-
Max Voltage (V) 11.00
-
Power (W) 139.00
-
Shaft A(mm) 3.00
-
Length B (mm) 24.00
-
Can Diameter C(mm) 28.00
-
Can Length D(mm) 11.00
-
Total Length E(mm) 28.00
