Quanum MT series motors are Spec built by DYS, well known in the industry for their quality and performance.
The MT line uses quality NMB bearings, high pole counts for torque and smooth operation and all have standardized universal mountings in their given size. Quanum has spec’d the motors with N42sh magnets and .2mm laminations for optimal efficiency. The MT’s also have ample motor wire length for a cut to fit installation, with included bullet connectors and shrink tube. Another great feature is that Quanum spec’d all the motors to come with mounting hardware in various lengths, as well as both hub and direct mount propeller options, so installation is a snap.
Each Quanum motor is QC checked for balance, wind, performance and mechanical tolerance. The DYS brand is well known for their BE series and the new spec built MT line will set new standards of value vs performance.
• High Power N42sh magnets
• Precision NMB bearings
• .2mm laminations for optimal efficiency
• Ample cut to length motor wires for a clean install
• Direct mount propeller or Hub style compatible
• Multi-length mounting hardware included
Lipo cells: 4-6S
Max Power: 674.9W
Max Amps: 30.4A
No Load Current: 0.70/22.2V
Internal Resistance: 0.45ohm
Number of Poles: 14
Motor Shaft: 4mm
prop shaft: 6mm CW prop adapter
bolt hole spacing: 25*32*44 M3
Lamination thickness: 0.2mm
Connector: 3.5mm bullet
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Good quality motors.Bought 4 and built a 1.2m quad,swinging 17x5.5 dynam props.AUW of quad with 2x5000mah 6S is 4.6kg,drawing 6~8A at 50pcnt throttle.Produced total 580 watts.Motor only feels warm after 8~9 minutes of flight at outdoor temperatures of 36 celcius. Only comes with CW prop adapter,but also comes with T style prop washer.Check the files tab for pic of the 1.2m diy quad.