Quanum Q-3D Brushless 3-Axis Camera Gimbal (suitable for Nova, Scout X4, Phantom, QR X350 etc.)

• Overall
• Quality
• Value

Walkera replacement, Great price and quality matched

Mar 31, 2018

Having point blank refused to pay prices being asked for the Walkera G-3D came across this Quanum Q-3D as a straight swap. So far, as I only received it a day ago it's connected and works perfect. Quality appears to match as identical. I did have to use my existing Tali H500 power input/data con ribbon cable which was not supplied with the Quanum. Great service and terrific delivery time. Ordered Monday and arrived via DHL on Thursday.

• Overall
• Quality
• Value

I mean, it works...?

Nov 23, 2016

While this thing is cheap, I think it's borderline lying trying to call it a 3 axis gimbal when one of the axis is not controllable from a transmitter. That is a minor annoyance compared to the power this thing pulls versus what the documentation says. The documentation states a power draw a bit over half an amp. I have tested this thing and it pulls twice that during normal operation and with NO vibration of any kind affecting it. I have to get a bigger regulator just to feed this thing while it sits on my quad.

• Overall
• Quality
• Value

So so

Nov 01, 2016

Ok given it's just a Walkera G-3D etc you'd think that Hobbyking would A. Release the USB tool and B. The firmware that Walkera did to move roll - yaw. You'd also presume that they'd have bothered to 'check' their product given the 'Passed' Sticker on it right? Nope missnig the counter weight in my box, also noticed that the yaw axis has not been properly calibrated sits 3-8 degree's off axis..

For the price Hobbyking it's a poor effort. You can buy better, more functional gimbals cheaper!

• Overall
• Quality
• Value

quanum 3d

Nov 01, 2016

no recomiendo este gimbal , antes de comprar mirar otra opcion , es imposible de ajustar . por otra parte ahora esta muuuuyyyyy caro , ojo !!!!

• Overall
• Quality
• Value

quanum 3d

Oct 30, 2016

This gimbal is crap, is deprogrammed every time I turn it on, I have to set the gains in each flight, and also now worth $ 316.77 a lot, in the market there are other better and much cheaper. I not recommend it, unless you want to problems do not buy it.

• Overall
• Quality
• Value

Customer Rated

Oct 30, 2016

This gimbal is crap, is deprogrammed every time I turn it on, I have to set the gains in each flight, and also now worth $ 316.77 a lot, in the market there are other better and much cheaper. I not recommend it, unless you want to problems do not buy it.

• Overall
• Quality
• Value

quanum 3d

Oct 30, 2016

I think they have gone mad, this gimbal is not so good to be worth $ 316.77. In the international market exinten other better and not worth much.

• Overall
• Quality
• Value

Customer Rated

Aug 04, 2016

I want to be as honest as possible with this review. Overall, this gimbal was poorly designed from the start and has several issues.

It's designed to work with GoPro's and I have a Hero3. However, due to the placement of the camera, attaching a USB AV cable is difficult to say the least.

You cannot not control yaw via an RC channel, but I was aware of this when I bought it. It's a minor inconvenience for me, but a bigger problem is how if you want to control pitch via an RC channel, you must also use another channel for roll stabilization. You cannot control just pitch as the roll channel floats and then eventually drifts. That is a pain.

Third, if you plan to use a different camera or add a filter, you must change power and gain settings every time you power up. Apparently, my gimbal does not save settings after I set them. Unfortunately, you would hope there was an easy USB connector to adjust settings via your computer, but you must buy a proprietary adaptor to do so. Why do this at all?

Fourth, vibration isolation to prevent camera jello is sub-par. Decent experimentation is needed even on a fully balanced rig.

Overall, I cannot recommend this gimbal despite it's low price. It's finicky and just wasn't properly designed to "make sense".

• Overall
• Quality
• Value

Customer Rated

Jun 17, 2016

TENGAN MUCHO CUIDADO CON LA POLITICA DE PRECIOS DE LA MARCA HOBBYKING
HOY TIENEN UN PRECIO Y MAÑANA OTRO , ES INDICNANTE .
TENGAN MUCHO CUIDADO CON ESTOS SEÑORES , PARA MI SON UNOS INCONPETENTES!

• Overall
• Quality
• Value

Certified Buyer Rated

May 02, 2016

This product is purchased in order to use the camera for fpv.

There are a lot of expectations.