The Quanum Venture FPV Quadcopter. It's time to Explore More.
The Venture FPV Quad started life as a H-quad giving the camera a forward unobstructed view of the sky ahead, as well as allowing for optimal equipment separation to minimise video transmission interfererence & perfect flight controller positioning. With a layout decided, a sleek purpose built molded frame was forged with an aluminum main spar and unibody strengthening. All the best provisions were taken into consideration, making the Venture the best FPV cross platform frame available with options and provisions beyond any other Quad in its class.
The Venture frame has a center spar to which most components attach. The ESC mount/power distribution board has pre-fitted 20A Afro ESC's and filtered FPV power lines. It also handles the centerline battery mounting. The Multi-mount FC position and Power module support can handle your choice of FC and remote UBEC/USB modules. The cross arms allow for in-tube wiring and the motor mounts not only look good, but protect the included 2213 MultiStar motors and have replaceable/optional landing skid options. The front arm mount houses a protected center camera mounting cube that can handle 30mm and smaller FPV cameras with vibration isolation pads. The lower molded unibody shell attaches to the arms and spar and has provisions for universal gimbal mounting and tall skids as an option. The lower shell also has a rigid top cross roll bar/GPS mount and a mounting cube for the FPV transmitter. The upper shell is vacuum formed poly carbonate for a balance in weight and strength and lends well to customizing. Access ports have been made for all types of gear so maintenance is a snap.
Most of the setup has been done for you, so all you need is to add your own flight controller board, radio and FPV equipment. This is perfect for those who know what they like, but don't want to have to spend countless hours building it.
The Venture is a refined evolution of multi-rotor DNA, and exemplifies cross use without compromise.
• Unibody and spare construction
• Quad esc mounting/PDB with filtered FPV power
• Protected stylish Motor Mounts
• Universal gimbal mounting and tall skid options
• Provisions for all types of equipment pre-molded
• Styled looks with true functionality
• Pre-installed motors and ESC's
Max prop: 8~10inch
FC mounting: Universal plate and 45mm
Power Distribution: 4 Afro 20A esc pre- installed with XT60 power lead
Motors: 2213 935KV Multistar Motors pre-installed
FPV camera mount: 30mm and smaller
FPV TX: 31x42mm
Gimbal Mounting: 45mm square and 40mm centerline
Quanum Venture FPV frame
4 x Afro 20A esc pre-installed
4 x 2213 935kv Multistar motors pre-installed
4 x Propellers 8x4.5
2200~3300 3s battery
DJI/HK PILOT/CC3D/Naze32/KK flight controller
Note: Free Shipping offer is only available for this product. Offer is not available when other items are in the cart.
Acquired one of the ARF version of this model, never ventured out of the fixed wing brigade before being an old boy of 75 found it a bit testing doing the software for the FC the Kingkong micro CC3D in Libre Pilot but successfuly set it all up and flys really well, have now ordered another one to experiment with have KK2 1.5 FC with OSD to access the screen will mount the lipo underneath the bottom and fix the flight controller where the lipo would normally fit under the removerble front cover, have Futaba 7c on first model but have Hitec Aurora 9 thinking of using this on next model any advice would be welcomeThis thing was poorly assembled, had a binding motor issue untill finally the shaft retaining clip popped off causing the top half.of the motor to fly off and send the venture crashing 200ft to the ground .
1Love this model, have all three versions and cant find fault with hem other than the lack of spares available. have also recommended the deluxe model to my father and brother-in-law and they have both bought them and are extremely happy, for the price the supplied equipment is fantastic, especially the deluxe model with includes the naza and the fatshark.Einfach nur Klasse dieser Copter. Fliege ihn mit KK2.1.5 Board und Multistar 5200mAh LiPo. Habe viel Spa mit diesem Modell.Fast Shipping, great lightweight frame, ready for everthing you might add! :)esteticamente per me il pi bel telaio. unica pecca che non ha moltissimo spazio all'interno se volete farlo ipertecnologico. la naza mv2 ci entra a fatica . per il resto sono soddisfatto.It's a dud! This thing is too heavy and too underpowered to even get off the ground! Photos of it flying must have been Photoshopped!A beautiful model with a futuristic look , made with quality materials my version is arf bought about two weeks ago I just have to assemble the flight controller and the receiver , just made will test the model.i receive this morning at 13,00 pm the package was in good condition i open it and ceck the items and the quad was right.perfect i when i assembly the remain items and thest the quad write other reviewIf you buy one of the pre-assembled ones, CHECK all the connection that the company makes. I bought one with a power system (so all I needed was the battery, controller and receiver. Flew it about 4 times, then suddenly for no reason, it fell out of the sky and busted two motor mounts. I thought there may have been some chance that I shut the stick off on accident. Bought a New frame kit $45 (just for the new motor mounts), replaced the motor mounts. Took it out for a flight again, Same thing happened this time blowing two motor mounts AND 3 props. This time the problem was identified, Where the two ferrite beads were supposed to be soldiered in, one end of each of the bead was NEVER soldiered. Only reason I found out, they actually pulled away from the board, and the etching where there should have been some soldier - there was none, it was clean. CHECK THE WORKMANSHIP or you'll be buying parts due to their shoddy work.