RADIOMASTER TX16S Max MKII (Black Edition) FCC 4-in-1 2.4GHz 16ch Multi-Protocol OpenTx RC Transmitter w/V4.0 Gimbals

The best just got better, the RADIOMASTER TX16S Max MKII OpenTx radio has been created to be the best radio in its class without compromising anything. It will allow you to fly a countless number of RC products using just one transmitter, and is expandible, and upgradeable, which makes it future-proof. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, retooled Tx body shell for improved fit and finish, redesigned battery cover, improved knobs and sliders that are smoother with a better center ident. The TX16S Max MKII is also available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

Being multi-protocol means you are not locked into one system such as FrSky, Futaba, RadioLink, etc. The built-in 4-in-1 internal multi-protocol RF system allows the transmitter to operate on the following protocols listed below:

Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
Texas Instruments CC2500: FrSky D16/D8, Futaba SFHSS, Corona, HiTec, Radiolink, Graupner HoTT
Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN, and most other Chinese models

All the above RF chips are integrated into one board and can be updated quite easily through the transmitter's operating system. There is an improved external module slot for other protocols, allowing modules such as JR/FrySky/TBS Crossfire to be used. The ergonomic design has been improved and the MKII now includes optional flat or raised rear grips to customize the feel of your TX 16S.

The Radiomaster TX16S is fully supported by the OpenTX firmware development team and its companion PC software, this will allow you if you wish to program your model and Tx settings directly from your PC. At the top of the transmitter is the USB-C data port for programming and easy firmware updates. A simulator port is also provided for connecting the Tx to your PC to enable you to fly your favorite RC flight simulator.

The TX16S Max MKII is supplied with various switches, rotary knobs and sliders, and a momentary switch which gives you lots of options when it comes to programming your models. There is an industrial-grade IPS 4.3" (480x272) 3-color LED daylight readable touch display screen for status and programming. The actual programming of the transmitter is a very simple affair using a combination of the touch screen, system/page buttons, and the menu scrolling wheel. Also included is a built-in USB-C charging system for 2 x 18650 cells, external UART ports to expand the capabilities of the Tx, an external SD card slot, built-in voice support, a folding carry handle, and much more.

Overall this is an easy-to-use, multi-protocol transmitter that removes the need for you to have many different types of transmitters at your disposal. The one internal module will work with today's most prominent RF protocols, and if used with additional external modules, it will operate even more protocols that are in use today.

Features:
• MKII version which has many improvements over earlier models
• Internal 4-in-1 multi-protocol RF system
• Compatible with OpenTX
• Super smooth, high precision V4.0 hall sensor gimbals
• 16 model memories (can be expanded with SD card)
• 4.3" 3 color LED daylight readable touchscreen display
• Built-in USB charging system for 2 x 18650 cells

Specs:
Type: RADIOMASTER TX16S Max MKII (Black Edition) FCC 4-in-1 2.4GHz 16ch Multi-Protocol OpenTx RC Transmitter
Frequency: 2.400GHz~2.480GHz
No of Channels: 16 (receiver dependent)
Tx Mode: Modes 1~2 (selectable)
Model Memories: 16 (expandable with SD card)
Internal RF Module: 4-in-1 FCC multi-protocol (CC2500/CYRF6936/A7105/NRF2401)
External Module Slot: JR/FrySky/TBS Crossfire
Compatibility: EdgeTX and OpenTX (EdgeTX installed as default)
Screen: 4.3" (480x272) full-color LED display
Gimbals: High precision V4.0 hall sensor
Antenna Gain: 2db (power adjustable)
Upgrade Method: USB-C (online) / SD card (offline)
Ports: External UART's for expansion
Voice Support Function: Yes
Vibration Reminder Function: Yes
Input Voltage: 6.6~8.4V DC
Working Current: 400mA@8.4V
Dimensions: 287x129x84mm
Weight: 750g (excluding batteries)

Includes:
RADIOMASTER TX16S Max MKII (Black Edition) FCC 4-in-1 2.4GHz 16ch Multi-Protocol OpenTx RC Transmitter w/V4.0 Gimbals
1 x 18650 Lithium-Ion battery tray
1 x USB-C cable
1 x Screen protector
1 x Pair of flat grips
1 x Pair of raised grips(fitted as default)
1 x TX16S key chain

Please note: A copy of the User Manual is available under the "Manual/Files" tab.