This LED strip contains 3 RGB (Red,Green, Blue) LEDs in every 50mm section.
The LED strip may be cut to fit into installations if necessary. Cutting marks are printed on the strip and must be adhered to. The smallest workable segment of the single color strip is 50mm long and contains 3 top Surface Mount LEDs.
During soldering, do not exceed a maximum soldering temperature of 260 Celsius degrees and the soldering time of 10 seconds. Solder connection should only be performed on designated solder pads on the strip.
There is a double-sided adhesive tape attached to the back of the strips. Care must be taken to provide a clean and dry mounting surface when mounting the strips.
This strip is not waterproof.
• Supplied with 4 terminal plug for easy connection to RGB LED driver allowing for multiple effects, colors, brightness and speed (sold separately)
• 5 meter long strip of RGB LEDs
• UL, CE and RoHS compliant
Max Operating Voltage: 12V
Max Power Consumption: 14.4W / 1.2A (per meter)
Beam Angle: 120°
Service Life: 50,000 hours
12V power source
Optional RGB LED driver for special effects (sold separately, see "Accessories" tab below)
nice and bright on a 3s lipo, im using it with the 21 function driverGood and very bright LEDs!! love it on my quads!!These are really really bright leds and since every LED can emit Red, Blue and Green Colors, mixing these colors from the control unit to get more colors are possible as well. 5 Starts from my side.RGB LED Flexible Strip with 4-pin Driver Connector 5m (Red / Green / Blue) may be used in conjunction LED RGB Multi-Function Driver / Controller (19 effects/20 colors). Tape is very comfortable, but not much important 5m enough to be used not only on one model;). Great price, excellent quality. Braves not jerks and damage it is not so easy :) Retrieved from experience.I got my night flyer out for a maiden flight this evening... I think I am blind form how bright it is in the sky. Pulsing, blinking, streaking across the sky!
video on you tube - ntHWY_JePuI