Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Rhino 4900mAh 6S1P 22.2v 20C Lipoly Pack

Rhino 4900mAh 6S1P 22.2v 20C Lipoly Pack

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
802 g
SKU:
R4900-20-6
Product
Description
 
Capacity : 4900mAh
Constant discharge: 20C
Burst rate: 30C (15sec)
Configuration : 6S 22.2v
Pack size: 169x49x41mm
Weight : 725g
Discharge plug: 5.5mm Gold Connector
Product
Specifications

Additional Information

  • SKU:
    R4900-20-6
  • Brand:
    N/A
  • Shipping Weight(g)
    802.00
  • Length
    160.00
  • Width:
    46.00
  • Height:
    48.00
  • Capacity (mAh)
    4900.00
  • Discharge(c)
    20.00
  • Length-A(mm):
    169.00
  • Height-B(mm):
    49.00
  • Width-C(mm)
    41.00
  • Unit Weight (g)
    725
  • Max Charge Rate(C):
    2.00
  • Discharge Plug:
    N/A
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
17c pull multiple times down to 3.6v RESTING!!! Which is around 3.1 under load and not puff, pop or overheat!! 20c load could go to 3.2 a cell under load easily without negative effects, that's using the whole 80pcnt capacity without having to end cycle because you're scared they pack will go negative. Capacity is a true 5000ish mah, not a 6500 mah pack that is heavier and marked as a 5000 so that the C rating can go higher. Will buy more, just every time they have them in stock they go quick!!! Need some in the US!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am using this battery in my Sebart Wind 50E with 75 amp ESC. Constant current being 50-60 amp. After 30 flights it gives good power and about 7 min aerobatic flight time but it is so swallen that I am afraid to use it anymore. I have good experiences of other Rhino lipos but this is somewhat dissapointment.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought two 4900mAh 6S1P 22.2v 20C Lipoly Pack. One battery is is absolutely bad. Had 3 bad cells. Unusable and cannot be charged. The second one has a bad cell, only 1.14v. What happened with quality, why quality of the batteries was previously much better?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very exceptional lipo battery. I am using with my Yak 89" and Scorpion 5545-180 and ESC 110 amp.
12s - 24x10 xoar
11s - 24x14 Angel super silent
11s - 24x10 3 blade Mejzlik
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
! 2pcnt. 550
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Trs bon accus, mont en 12S sur un extra 300 de 6kg une pche surprenante 9mn de vol avec une hlice APC lectro 20X12,5 , j'en commande d'autres !!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought four 4900mAh 6S1P 22.2v 20C Lipoly Pack

When I measure the internal resistance of Lipoly with Icharger, the internal resistance are around 4~5. The 4~5 resistance are relatively high value in my experience compare with other Lipoy.

One of them has very high internal resistance than other cells. The data is following.

The measured cell voltages : 3.89 3.87 3.80 3.89 3.81 3.85

Internal Resistance : 4 5 36 4 50 5

When I ask exchange HobbyCity said that a cell voltage difference of less than .245v per cell cannot be replaced.

I am very disappointed.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought four 4900mAh 6S1P 22.2v 20C Lipoly Pack.

When I measure the internal resistance of this Lipoly with Icharger, the internal resistance around 4~5. It's not good.



One of them is very high resistance.

The measured cell voltages : 3.89 3.87 3.80 3.89 3.81 3.85

Internal Resistance : 4 5 36 4 50 5



Two cells have nonnormally high resistance.

HobbyKing said packs which have a cell voltage difference of less than .245v per cell cannot be replaced.



I am very disappointed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
super product for my t-rex 600 esc flybarless..recommande this product anytime.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excelente baterias para 600 e 700 helicopteros eletricos
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.