Walkera Rodeo 150 Mini FPV Racing Drone (RTF) (White) w/camera/Devo7/VTX (Mode 2) (US Plug)
Yeeha here comes the Rodeo. The Rodeo 150 is an exciting new FPV racing drone from Walkera. Its small size and stylized symmetrical modular design makes it not only visually impressive but it will cut through the air.
The outer casing not only looks good but keeps all the electronics out of harms way as well as stopping electronic interference. The Walkera Rodeo is built for racing, both indoor and outdoor. Matched with the included 600TVL, 110 deg wide angle, mini camera up front for day flying and also extremely good in low light conditions. A big LED light up front shows you the way while there are circular red LEDs on the side so people can see where you’re going.
The F3 flight controller is easily updated and can be configured to suit your flying style through Cleanflight. The professional 5.8GHz video transmitter is built for racing drones with zero delay and 40 available video channels (race band inc.). Just a flick of a switch will change the 3 preset flight modes to suit your flying level (Stabilized, Intermediate and Advanced (for 3D flying).
It’s time to get the Rodeo before this racing drone gallops out the door.
• 600TVL low light FPV Camera
• F3 flight controller
• Streamlined design
• Devo-7 radio transmitter (Mode 2)
• 5.8GHz HD video transmitter, 40 ch (raceband)
• 3 flight modes (stabilized, intermediate, advanced)
• Small frame
Main Rotor Dia: 96mm (3.5”)
Overall (L x W x H): 137 x 148 x 77mm
Weight: 159g (Battery excluded)
Remote Controller: DEVO 7 (Mode 2)
Main Controller: FCS-Rodeo 150
Video Transmitter: TX5832(FCC)
Brushless Motor: WK-WS-17-002(CW/CCW)
Brushless ESC: Rodeo 150
Battery: 7.4V 850mAh 30C 2S LiPoly
2D Flight Time: 7~8mins
Working environment: -10C~ +40C
Horizontal Resolution: 600TVL
FOV: 110 deg
System Committee: PAL/NTSC
Video Out: 1.0Vp-p/75Ω
Power Input: DC 5-12V
Video Transmitter Specs:
5.8GHz wireless image transmission
TX5832(FCC) Bind B section: 4 channels (US)
TX5832(FCC) output power: 100mW (US)
1 x Walkera Rodeo 150
1 x Devo 7 (Mode 2)
4 x Self-Tightening Propellers
1 x GA005 Balance Charger
1 x Transformer (US Plug)
1 x Battery (7.4V 850mAh)
1 x USB cable
1 x Cable
FPV Googles or Monitor
Unit Weight (g):
Max Charge Rate(C):
This thing is an absolute blast to fly not to mention it has killer looks! Incredible power and speed while superbly controllable and smooth. It's not perfect though.
The stock camera is awful - a blurry mess really. I have modded mine with an aftermarket camera. It's a shame that a better camera was not incorporated.
The battery door is difficult to close after installing stock lipo - needs more room. Lipo battery life is poor - I'm averaging only 3 mins on my 4 stock batteries.
Disassembly of the quad is very tricky and hard to do. Everything kinda snaps together so you have to pry panels apart.
TX antenna is very poor and should be the first thing you upgrade. I broke two antennas on my first 3 flights!
Finally, I'm not a fan of the Devo TX because it's bulky and heavy. Probably due to the fact that it requires 8 AA batteries!!
All in all, a fantastic flying quad but a let down for FPV flying.I love this little thing! My youtube channel has videos of me flying it and here is a link to the last flight through FPV view! https://www.youtube.com/watch?v=HhxJY-ImRns I have flown and crashed it hard and had ALOT of fun flying it only replacing 2 bent props over MANY flights and crashes. My youtube channel has videos of me flying it and here is a link to the last flight through FPV view! Bottom line, worth the money! The PIDS and everything in the video are all STOCK!