Total Price

$0.00

Cart 0 Cart 0 Loading...

RotorStar Brushless Outrunner Helicopter - 4956-600kv (600/.50 size heli)

Generating Links

RotorStar Brushless Outrunner Helicopter - 4956-600kv (600/.50 size heli)

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
9192000146-0
want FREE shipping? Click here to find out more!

RotorStar Series brushless motors offer the absolute best quality, performance and value for your high performance helicopter model. Each and every RotorStar motor is thoroughly inspected and tested to ensure the high efficiency and top performance required for meeting the demands of 3D helicopter pilots.
 
RotorStar Series motors are top quality brushless outrunners designed specifically for use in todays high performance helicopter models.
 
We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufacturers on the market today.
 
The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.
 
The RotorStar motors are suited to modelers who are seeking a top quality brushless helicopter motor without compromise.
 

*Perfect for Trex 600/HK600/Raptor 50/Gaui X6/Logo 600 or any other 600/.50 size helicopter.
 

Specs.

Turns: 10T
Voltage: 8S~12S Lipoly
RPM/V: 600kv
Motor Poles: 10
Internal resistance: 0.0163 Ohm
Max Loading: 85A
Max Power: 3770W
Shaft Diameter: 6mm
Shaft Length: 21mm
Screw Mounting Spacing: 25mm/30mm (M4)
Weight: 393g
Motor Plug: 4mm Bullet Connector

  • Kv(rpm/v) 600.00
  • Max Current (Motor) (A) 85.00
  • Resistance (mh) 0.00
  • Max Voltage (V) 45.00
  • Power (W) 3770.00
  • Shaft A(mm) 6.00
  • Length B (mm) 56.00
  • Can Diameter C(mm) 49.00
  • Can Length D(mm) 44.00
  • Total Length E(mm) 78.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • RotorStar Brushless Outrunner Helicopter - 4956-600kv
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

christopher | Verified Buyer

  • Value
  • Quality
  • Overall

powerful motor and very good value.

Jun 13, 2017

I use this motor in my goblin 570 running on 12s. Headspeed is 2,200 Rpm for normal flying. Idle up 1 is set at 2,400 Rpm. Idle up 2 set at 2,600 Rpm. flight time is about 6 MIns in normal mode after landing the motor is cool enough to hold your hand on, it gets warmer on the higher speeds but not enough to cause any concern. so far had about 50 flights without any problems. Esc is YEP 100 Amp HV, and i use a YEP 20 Amp BEC as well.
Cannot fault this motor at all,excellent value and plenty of power.

christopher | Verified Buyer

  • Value
  • Quality
  • Overall

powerful motor and very good value.

Jun 13, 2017

I use this motor in my goblin 570 running on 12s. Headspeed is 2,200 Rpm for normal flying. Idle up 1 is set at 2,400 Rpm. Idle up 2 set at 2,600 Rpm. flight time is about 6 MIns in normal mode after landing the motor is cool enough to hold your hand on, it gets warmer on the higher speeds but not enough to cause any concern. so far had about 50 flights without any problems. Esc is YEP 100 Amp HV, and i use a YEP 20 Amp BEC as well.
Cannot fault this motor at all,excellent value and plenty of power.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories