Copy and Share the Below URL
The design aim of RS410 is to reduce the weight and size as much as possible, and make it suitable for the micro indoor electric aircraft. Do not take it for granted that micro aircrafts dont require a high capacity receiver. Only on few occasions that the reducing capacity of the receiver seems not have terrible impact. Once there are more transmitters around the ground, indoor RF is much worse than that of outdoor. Cordless phone usually have a 300m (1000) range in the open field, while indoors, when it will have some noise somewhere in the same room with the base unit. The engineers of CORONA noticed it. So, aside form using the latest SMT technology to manufacture RS410 of 4g only, they also make it have all the capacities of full-range receiver. Therefore, RS410 can be used by all the 4-channel R/C aircrafts, including micro indoor electronic plane and full-size glow plane.
See the RS 410 User Guide for more details.
http://www.corona-rc.com/images/stories/dowmload_files/RS410%20Introduction.pdf
Size | 0.17oz/4.7g(with shrink wrap) |
Weight | 0.14oz/4.0g(without shrink wrap) |
Sensitivity | about 2.0ìV |
Selectivity | ±8kHz at 65dB down |
Number of channels | 1-4 |
Filtering | Dual turned RF circuitry |
Filtering | Dual 4 pole ceramic filter |
Filtering | DSP filtering in MCU with mild algorithm |
Shift polarity | Positive or negative (auto-detect) |
Case | Shrink wrap |
Operating Voltage | 4.8V~6.0VDC |
Operating Current | 11mA |
Modulate | FM/PPM(pulse position modulation) |
Michael Daniell | Verified Buyer
-
Overall
-
Quality
-
Value
Corona RS410 RX 36Khz
Nov 14, 2007
Martin Sniedze | Verified Buyer
-
Overall
-
Quality
-
Value
Longer range test
Nov 14, 2007
Martin Sniedze | Verified Buyer
-
Overall
-
Quality
-
Value
Corona 4CH test
Nov 14, 2007