RS810 Single Conv. 8CH Micro Rx 41Mhz
RS810 Single Conv. 8CH Micro Rx 41Mhz
SKU:
RS810-41
Share :
Awesome!
want FREE shipping? Click here to find out more!
Report Issue
Not Cheapest?
Copy and Share the Below URL
RS810 is an 8-channel, full range, and narrowband receiver. Supported by modern electronic technology, it can reach good performance by several grams. If a receiver only has the function of receiving signals, and its external size is similar to a MP3, it is totally unnecessary. Remember a MP3 has a PLL radio, a memory, a powerful microprocessor, a liquid crystal, a lithium battery and an exquisite case! RS810 is actually a 8-channel, small size, full range and narrowband receiver. Different from the traditional receiver with analog chip decoder, onboard DSP MCU can distinguish valid signal from noise signal intelligently, rather than pass them all to the servo directly. Therefore, when a DSP receiver has the same sensitivity (range) with the traditional receiver, DSP receiver is silent (no glitch) in full range. However, the traditional receiver will get jitter slightly when it exceeds half of its range, and the further you go, the worse. In addition, the sensitivity of RS810 is about 2-3ìV, while it is about 4-5ìV of the traditional full range receiver. With such a great capacity performance, we can assure the control distance has sufficient margin.
See the RS 810 User Guide for more details.
See the RS 810 User Guide for more details.
| Size | 1.4”x0.9”x0.4?36x22.6x10.3mm) |
| Weight | 0.32oz/9.1g (with shrink wrap) |
| Sensitivity | about 2.0ìV |
| Selectivity | ?kHz at 65dB down |
| Number of channels | 1-8 |
| Filtering | Dual turned RF circuitry |
| Filtering | Dual 4 element ceramic filter |
| Filtering | DSP filtering in MCU with mild algorithm |
| Shift polarity | Positive or negative (auto-detect) |
| Case | Shrink wrap |
| Operating Voltage | 4.8V~6.0VDC |
| Operating Current | 11mA |
| Modulate | FM/PPM(pulse position modulation) |
Topics
Sort by
Most Recent Topics
