An excellent strong lightweight glass fiber Quadcopter frame with landing gear and a bonus power distribution board (PDB) for neat and easy wiring. This Quad has 480mm motor centers so is ideal for 9 and 10 inch props and it also has an adjustable battery mount to achieve the perfect weight distribution and the bottom frame is ready to take a whole host of camera mounts and gimbals making it perfect for FPV and filming projects.
The S500 is supplied with 2 x blue and 2 x white arms that are super ridged and have a carbon fibre rod through the center making for the strongest arms we have seen to date in this style of frame. The Blue and white arms make orientation much easier and there is no need for different colored props. The included landing gear has plenty of height making it suitable for GoPro type gimbals or similar. Another feature of the S500 is that when assembled the arms have a slight up sweep, this gives the Quad a dihedral effect which helps make it very stable, especially when descending from altitude.
Assembly of this frame is super simple with pre-threaded sleeves for all the frame bolts so no lock nuts are required. It utilizes one size bolts for the entire build which means you only want one size hex for the assembly. Another feature is the locating tabs for the arms which enables you to achieve the perfect alignment when building. The motor mounts are ready to take a selection of motors with mounting hole centers of 16, 19 and 25mm once again making this a very universal frame at a very affordable price.
We offer a full range of multi-rotor flight control boards, motors, speed controllers, batteries, camera mounts and gimbals and much much more. Take a look at the related items so you can build your S500 and know it is going to perform brilliantly, it has never been easier or more affordable to get your Quad in the air.
• Built from quality glass fiber and polyamide nylon
• Pre-threaded brass sleeves for all frame bolts
• Locating tabs for arms
• Colored arms for orientation to help you to keep flying in the right direction
• PDB for easy and neat wiring
• Easy assembly
Motor centers: 480mm
Weight: 425g (frame only)
Motor Mount Bolt Holes: 16~19~25mm
4 x 28mm 800~1000KV motors
4 x 18~30A speed controllers
4 x 9x4.7~10x5 props
1 x HobbyKing® multi-rotor control board
1 x 2200mah 3S 11.1V to LiPoly battery or more.
I received this frame kit about a week ago. I was finally able to assemble everything over the weekend and get it up in the air. Let me tell you, I don't normally write many reviews, but when I do it's because I like and believe in a product. This thing is very sturdy. I have had other frames where the arms are too flexible for my liking, but not this one, these arms are perfect! It has a slight curve upward as well which helps with stability. The only thing that I think could be improved upon is the landing gear, which is a little less sturdy, but in it's defense it does need some flex to take those not so soft landings. I liked this frame so much I bought 2 more this weekend after flying the one I bought for a few hours!It arrived today in a nice blue box. It looks like a premium product and for that price this is the best that you can get.
The plastic is rigid and the manufacturing is precise. The arms actually have carbon fiber core.This kit is exceptional! I didn't expect too much from an $18 frame, well I was proven quite wrong as every part of this kit is very well designed and built. Main plates are strong and precisely cut. Everything fits perfectly and it all looks good too. My setup: 1200kv motors, 10x4.5 APC's, APM controller, gimbal and 4000mAh battery. Add long CF landing gear and you have a very light quad with easy access to the battery and camera. This quad, in part due to the dihedral is very stable and can take larger props if necessary. All in all a great purchase.The arms are a lot stiffer than other similar looking frames sold by HK and this makes for a nicer flying multi. The inward facing motors helps with stability and it does fly nicely. Easy to construct and set up, suit a beginner to multis. I didn't bother using the legs supplied or the PCB though.Great quality kit for very little money! Parts are well made, uniform and fit perfectly together. Instructions are a little cursory but this isn't rocket science either. Will be using 2212 920kv motors with APC 10x4.5 props and replacing the 4 legs with 2 carbon fiber T skids for extra clearance.Works as it should and good quality. Equipment can fit anyware. Strong recommendationsurprisingly good quality.
the arms have metal inserts for skrews.
Perfect for replacing my old self build glued wood aluminium frameMore than 15 flights with it,hyper strong frame with less vibe for the fpv gear.perfect for fpv flight.Acho esta frame fantstica.
bonita, leva e muito resistente.
Aconselho a sua compra.