SkyZone has forged a reputation of quality and reliability and has been tested and developed by FPV pilots for FPV pilots.
The TS832 Transmitter packs a whopping 600mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The TS832 is transmitting a full range of 32 channels and uses an easy to use 2 button interface, it also comes with a clean pre-wired harness, and only weighs in at a scant 21g, it’s Perfect for a wide range of aircraft!
The RC832 Receiver is nice and small in size for easy integration into your ground station, but big in quality and features. The receiver uses the same two button interface as the TS832 Transmitter making channel swapping a breeze. There are two independent AV outputs for both audio and video. So you can use a monitor and set of goggles or maybe a DVR to record your flight, for when your significant other asks where you were for the last 4 hours. Powering the receiver at the field is as easy as plugging in a 3 cell lipoly into the included prewired cable with mini JST. It just doesn’t get any simpler than this.
*For best range and video link stability we recommend using the SkyZone 5.8GHz Cloud Spirit circular-polarized Antenna Set (SMA-RP) available below in the accessory’s tab
• 32 channels: Cover A, B, E bands and F bands
• Two switching buttons for the band and channel
• Two digits display for the band and channel
• Power off memory for last channel and band
• dual Independent video and audio signal outputs
Video format supported: NTSC/PAL
Antenna connection: RP-SMA, jack (module side, both TX and RX)
Transmitter TX TS832 specs:
Power input: 7.4-16V (3S Lipoly suggested)
Transmitting power: 600mW
Antenna gain: 2dbm
Working current: 220mA at 12V
Video bandwidth: 8Mhz
Audio bandwidth : 6.5Mhz
Dimension: 54x 32x 10mm(excluding antenna)
Receiver RX RC832 specs:
Power input: 12V
Working current: 200mA max
Antenna impedance: 50Ω
Antenna gain: 2db
Rx sensitivity -90dBm
Video impedance: 75Ω
Video format: NTSC/PAL auto
Dimension: 80x 65 x15mm
- Blade Count:
schermata numeri rotta
Really impressed with this product! I am a newbie to FPV and had invested in different cheaper setups before. I would suggest anyone who wants to get into FPV but is hesitant of spending this much to just go for this one. It is great value for the money. Easy to setup and use and the transmitter stays remarkably cool when in flight(29 Celsius weather ). Highly recommended!
Good product! been using for 2 years now! never failed! (and I am a newbie to Fpv) Highly recommended!
franchement le matriel qu'il faut achet, les branchement sont simple, et la rception du signale est parfaite
some people talk this is good
eccellente funziona benissimo plusplusplusplusplusplus
Ground tested, 1km range with clear picture... believe can go even further. more to come. very satisfied with it.
Ok guys, I have been using this unit for a few months now. Here is my input: With a 3 cell 1000mah battery, I can power tx and camera for 30 minutes. I use a 3s 2200mah to power the rx as well as my monitor. I swapped antenna for 5.8GHz circular polarized antenna right here from HK. My video receiver is on a tripod lifted 5 feet from the ground, this GREATLY improves performance, as does flying in open spaces. With this setup I have so far traveled 2.6km with CLEAR video.
perfetto e potentissimo, nessuna perdita di segna o interferenza anche a grandi distanze
Fantastic product. Highly recommend this. Compatible with fatshark goggle's VRX
No File Name download now [306kb] No File Name download now [296kb] No File Name download now [306kb] No File Name download now [296kb] No File Name download now [409kb] TS832 - RC832 Manual download now [409kb]