5.8GHz 8CH Diversity Receiver w/tracker link port, dual output.
• A/V receiver with diversity antenna inputs
• Tracker link port for direct link to an antenna tracker
• SMA antenna connectors, compatible with standard 5.8GHz antennas (omni or directional)
• Frequencies: 5705, 5645, 5665, 5685, 5885, 5905, 5925, 5945MHz
• Supplied with two 5.8GHz ‘Rubber-duck’ antennas
• Not affected by 2.4GHz R/C radios!
Input voltage range: 12V (3S lipo)
Antenna connection: SMA
5.8GHz diversity receiver
Power cable w/JST plug
** Many fake, poor quality & untested FPV products are currently entering the market. Don’t get caught out with poor quality substitutes, SkyZone FPV equipment is tried and true and has been tested and developed by FPV pilots for FPV pilots.
- Blade Count:
If you have a deal with migration from RC305 receiver to this device be
avare that antenna connector is differ: RP-SMA on 305 vs SMA on deversity
receiver. You need new set of antennas or adaptor like: [SMA male to RP-SMA female]Very good. Doesnt overheat like other people say. Use it on a 12V Pb 7Ah battery that powery my antenna tracker. Gets warm but not hot. Switching is very good, you dont see it when the image switches.Muy contento con este diversity, lo uso con una SPW en un rx y una helical en el otro, el cambio es rpido y no notas nada en la pantalla. La sensacion es tener un video mucho mas claro y nitido durante mas tiempo, perfecto, muy contento con este diversity. Adems puedes usarlos como dos rx independientes cada uno en un canal y tiene tres salidas de video, una para rx1, otra para rx2 y la tercera es la que hace el diversity. Como decia antes lo recomendieno, no notas en absoluto cuando cambia de antena y lo hace rapidisimoI Read the proir review . So i did my own tests . now bean sitting for 20 min , and its Warm , I have the 16 db directional and a 12 spiral coil . being all 5.8 best aleals i also use with emmersion diversit , now both diversitys sit on top of each other the china brand Heear in review is Verry Good I choose to tune in 1 channel first only channel 3 then ,to turn on the other seperaty . and when both are ,to start with . on with one channel . tune it same .>> I then switch both on , Very good priduct A1 not very hot but a easy to add a heat sink like A ESc . A large alloy heat sink with Fan or not can Help . tho all possible to mount on a small alloy metal plate mount . and 12 volt .is best to recieve Uning large Areals . 11.5volt at least .> Voltage for good distance boost . signals are Very Clear Very well tuned and A1 item .After reading some of the comments about this product (after I had already ordered it) I put them to the test.
1. The diversity works
2. Antenna tracking works (check compatibility)
Its small compact and the power terminal it away from the antenna jacks.
This thing gets hot.....really hot. I burnt my finger by touching the outside after it ran for about 20 min. The voltage regulators heat up way too much. 175 degrees running at 12v...before thermal shutdown. Better at 9v but still over 120 degrees and noticable glitch when antennas change.
I removed it from the case, added a bunch of heat-sinks and a small fan and cut outs for airflow. Runs well now. Tested for 2 hours and stayed below 100 degrees.
I like the rx, just wish they would have placed a bit more importance on product quality.
D58-2 Specifications download now [83kb] D58-2 5.8G 32 ch Diversity Receiver download now [128kb] D58-2 5.8G 32 ch Diversity Receiver download now [128kb] Manual download now [102kb]