New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Sprint F3 Tunnel Hull Outboard Motor Set

Sprint F3 Tunnel Hull Outboard Motor Set

Shipped From:
  • Global
QTY:

Now save save $0.00 $0.00

$82.43
Status:
Backorder
Weight:
425 g
SKU:
194000006
WANT FREE SHIPPING? Click here to find out more!

The sprint F3 Tunnel Hull Outboard Motor Set is powered by a 3000kv high-torque brushless outrunner motor connected to a direct drive flexi shaft. The outboard setup is supplied as a complete unit which simply bolts on to the hull allowing for quick assembly/disassembly.

Specs:
Motor: 3000kv brushless outrunner
Voltage: 3s 11.1v
Recommended ESC: 60-90A watercooled

  • SKU 194000006
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight(g) 425.00
  • Length 200.00
  • Width 60.00
  • Height 160.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I purchased this motor and I had with it 2 major problems.
1. The cooling plate on the motor side was leaking. Test yours before you use it. Feed water from one end and close the exit, with cover of the motor removed, so you can see the leak. I fixed mine by making a plate of 1 mm aluminium which I fitted between the motor and cooling plate and sealed on the plate side with silicon grease.
2. Warning: The motor is supplied absolutely dry !, Do not use it before you open the motor boot and grease/oil the flexible and propeller shaft !. The boot has an orifice to oil the
propels shaft. Mine was leaking and when I examined it I realized it is impossible to seal the oil by defective design. I managed to seal mine by the use of liquid rubber silicone. It is a delicate operation, to much silicone can block the passage of the oil.
The above review is from an exigent professional engineer.

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

I purchased this motor and I had with it 2 major problems.
1. The cooling plate on the motor side was leaking. Test yours before you use it. Feed water from one end and close the exit, with cover of the motor removed, so you can see the leak. I fixed mine by making a plate of 1 mm aluminium which I fitted between the motor and cooling plate and sealed on the plate side with silicon grease.
2. Warning: The motor is supplied absolutely dry !, Do not use it before you open the motor boot and grease/oil the flexible and propeller shaft !. The boot has an orifice to oil the
propels shaft. Mine was leaking and when I examined it I realized it is impossible to seal the oil by defective design. I managed to seal mine by the use of liquid rubber silicone. It is a delicate operation, to much silicone can block the passage of the oil.
The above review is from an exigent professional engineer.

This makes for the perfect project I love this thing always turns heads and has people asking questions

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

This makes for the perfect project I love this thing always turns heads and has people asking questions

hello does anybody knows the Motor Mounting Hole Centers for this unit? i have a 3500 kv motor with 25mm mounting holes to center but this page does Not says anything about mounting holes for the motors thanks

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

hello does anybody knows the Motor Mounting Hole Centers for this unit? i have a 3500 kv motor with 25mm mounting holes to center but this page does Not says anything about mounting holes for the motors thanks

This is the second one of these I have

brought and I am installing it on 750mm deep vee. The first one I installed on a 600mm deep vee and super fast with no upgrades e.g.2836/3700kv/700w motor,4s battery and 32mm 1.4pitch 3 blade prop.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is the second one of these I have

brought and I am installing it on 750mm deep vee. The first one I installed on a 600mm deep vee and super fast with no upgrades e.g.2836/3700kv/700w motor,4s battery and 32mm 1.4pitch 3 blade prop.

I recieved one week ago. 4 weeks delivery lead time ,as expected. I purchased it to replace a Gtx 650.
Very good surprise : Very good quality for that price.
I tested yesterday. Very good results for a boat which is not build for high speed. I like the sound of outrunner motor, the first one I purchased.
I recommend it.
Philippe

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I recieved one week ago. 4 weeks delivery lead time ,as expected. I purchased it to replace a Gtx 650.
Very good surprise : Very good quality for that price.
I tested yesterday. Very good results for a boat which is not build for high speed. I like the sound of outrunner motor, the first one I purchased.
I recommend it.
Philippe

As mentioned before, this outboard's quality is lightyears ahead of the one that came with the Hornet F1. I have now used this F3 outboard on my Hornet F1. I was expecting the motor not to be able to get it moving fast, but this is a Great upgrade! The Hornet runs much better. Fewer snipouts. Good speed. Smoother takeoff.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As mentioned before, this outboard's quality is lightyears ahead of the one that came with the Hornet F1. I have now used this F3 outboard on my Hornet F1. I was expecting the motor not to be able to get it moving fast, but this is a Great upgrade! The Hornet runs much better. Fewer snipouts. Good speed. Smoother takeoff.

This outboard looks awesome,
The quality of the parts is exelent.
It came with all the needed parts (servo rods, prop, etc.)
The overall look of the outboard looks pretty scale for a tunnel bit it looks just as good on my mono Hull. And runs just as good as it looks with a 90A Esc on 3/4s lipo.

Great deal fort the money.
A high quality outboard for all types of boats

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This outboard looks awesome,
The quality of the parts is exelent.
It came with all the needed parts (servo rods, prop, etc.)
The overall look of the outboard looks pretty scale for a tunnel bit it looks just as good on my mono Hull. And runs just as good as it looks with a 90A Esc on 3/4s lipo.

Great deal fort the money.
A high quality outboard for all types of boats

great piece of gear works well on a hornet and looks great, be mindful to keep the oil up to it though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great piece of gear works well on a hornet and looks great, be mindful to keep the oil up to it though.

Sieht sehr gut und sehr solide aus. Verarbeitung ist top, kleinere Vernderung, z.B. bei den Buchsen,sind schnell erledigt und erhhen das Fahrverhalten.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sieht sehr gut und sehr solide aus. Verarbeitung ist top, kleinere Vernderung, z.B. bei den Buchsen,sind schnell erledigt und erhhen das Fahrverhalten.

Motor sieht sehr vielversprechend aus. Aber richtig berrascht war ich von der extrem schnellen Lieferung. Wenn es doch immer so wre.

Rolf

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor sieht sehr vielversprechend aus. Aber richtig berrascht war ich von der extrem schnellen Lieferung. Wenn es doch immer so wre.

Rolf

  1. 1
  2. 2
Customer files
hornet f1 linkage/cover mods Download [198]
No File Name Download [187]
No File Name Download [152]
F3 Modified Download [113]
hornet mod Download [3734]
n.1 Download [4862]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!