New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Steerable Floats for Cessan 182 1.5meter Seaplane

Steerable Floats for Cessan 182 1.5meter Seaplane

Discontinued Product

Please continue searching for a similar product.
SKU:
C-182Floats
WANT FREE SHIPPING? Click here to find out more!
Steerable Floats for 182 1.5meter Light Aircraft/Seaplane 


*Note: The 182 seaplane sold separately.
  • SKU C-182Floats
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 1359.0000
  • Length 890.00
  • Width 135.00
  • Height 230.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Plavky na hydropln , s z kvalitnho tvrdho EPP. Prekvapia svojou mohutnostou plus v dodavke je aj servo na ovldanie kormidla.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plavky na hydropln , s z kvalitnho tvrdho EPP. Prekvapia svojou mohutnostou plus v dodavke je aj servo na ovldanie kormidla.

Hele mooie drijver set, 85cm in lengte gewicht inclusief aluminium stangen 465 gram!!

Perfecte afwerking en goede montage mogelijkheden.

Ga binnenkort onder mijn Bixler 2 proberen, denk wel dat ze aan de grote kan zijn maar is het proberen waard!!



Test results later.



Great job HK!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hele mooie drijver set, 85cm in lengte gewicht inclusief aluminium stangen 465 gram!!

Perfecte afwerking en goede montage mogelijkheden.

Ga binnenkort onder mijn Bixler 2 proberen, denk wel dat ze aan de grote kan zijn maar is het proberen waard!!



Test results later.



Great job HK!!

These floats are great! Made my EdoModel and suit the EdoModel Cessna that hobbyking sell (although they dont use the brand name). Highly recommend this product, my Cessna seaplane is a whole lot of fun!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These floats are great! Made my EdoModel and suit the EdoModel Cessna that hobbyking sell (although they dont use the brand name). Highly recommend this product, my Cessna seaplane is a whole lot of fun!!

very large floats made out of foam whit one servo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very large floats made out of foam whit one servo

VERY IMPORTANT to seal all the joints with clear tub & tile sealant or equivalent silicone adhesive! These units are NOT WATER-TIGHT as we all would expect. The two halves are loosely joined together by the manufacturer with cheap adhesive. Blowing air through the seams penetrates the floats in between gaps. Otherwise, the construction is good and the hardware is solid but rudder servo is cheap, noisy, and does not center well. I'm using these on a 55" EPO cessna 182 weighing approx. 2 lbs.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

VERY IMPORTANT to seal all the joints with clear tub & tile sealant or equivalent silicone adhesive! These units are NOT WATER-TIGHT as we all would expect. The two halves are loosely joined together by the manufacturer with cheap adhesive. Blowing air through the seams penetrates the floats in between gaps. Otherwise, the construction is good and the hardware is solid but rudder servo is cheap, noisy, and does not center well. I'm using these on a 55" EPO cessna 182 weighing approx. 2 lbs.

First flight I had trouble getting off the water and when I did I could not keep the plane level. I hit the water and one float broke from the mount. The plastic that attaches them is not very strong. Anyway I discovered that one of the floats had water inside of it. This is prob why I could not keep the plane from turning. I am guessing the float has a bad seal somewhere so it filled with a little bit of water and I just couldnt keep her level. I have to figure out a way to repair these floats so I can try again now. The servo was also mounted reverse and the push rod is way to flexible. Im not very happy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First flight I had trouble getting off the water and when I did I could not keep the plane level. I hit the water and one float broke from the mount. The plastic that attaches them is not very strong. Anyway I discovered that one of the floats had water inside of it. This is prob why I could not keep the plane from turning. I am guessing the float has a bad seal somewhere so it filled with a little bit of water and I just couldnt keep her level. I have to figure out a way to repair these floats so I can try again now. The servo was also mounted reverse and the push rod is way to flexible. Im not very happy.

Very, very nice floats. Has a servo built into the right float with a piece of plastic glued over it to keep it dry. Also includes an extension Y-cable for plugging into your plane's rudder. The water rudder is very nice and works well and is easily mounted/removed from the float. Tried this on a souped-up Hawk Sky and had to make smaller struts to fit the HS fuse. Couldn't get it off the water, though, the HS was not powerful enough.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very, very nice floats. Has a servo built into the right float with a piece of plastic glued over it to keep it dry. Also includes an extension Y-cable for plugging into your plane's rudder. The water rudder is very nice and works well and is easily mounted/removed from the float. Tried this on a souped-up Hawk Sky and had to make smaller struts to fit the HS fuse. Couldn't get it off the water, though, the HS was not powerful enough.

The quality of the floats is nice, every detail is present in the box. I took one star off, because the metallic parts are too thick and heavy. They could be a little lighter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The quality of the floats is nice, every detail is present in the box. I took one star off, because the metallic parts are too thick and heavy. They could be a little lighter.

Hi, can I use it for EPO Giant cessna 182? Or which floats on HK are optimal for this model? Thank you for replay.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi, can I use it for EPO Giant cessna 182? Or which floats on HK are optimal for this model? Thank you for replay.

came well packed (double boxed) nicely finished foam includes servo and fittings but no screws or bolts???

will fit to 1.4m cessna with flaps 35 42 ..1250motor 10x6 prop...expect good results

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

came well packed (double boxed) nicely finished foam includes servo and fittings but no screws or bolts???

will fit to 1.4m cessna with flaps 35 42 ..1250motor 10x6 prop...expect good results

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!