SU-35 MkII Fighter Jet 735mm (29") EPO (PnP)

• Overall
• Quality
• Value

5

Dec 08, 2019

I bought a beautiful plane, thanks. BUT! Why doesn't the description say that a transmitter with channel mixing is required? As always, outrageous meager instructions do not even indicate the recommended center of gravity. So what's next? In addition to the plane for $ 100 to buy equipment for 400?

• Overall
• Quality
• Value

5

Dec 08, 2019

I bought a beautiful plane, thanks. BUT! Why doesn't the description say that a transmitter with channel mixing is required? As always, outrageous meager instructions do not even indicate the recommended center of gravity. So what's next? In addition to the plane for $ 100 to buy equipment for 400?

• Overall
• Quality
• Value

pretty disappointing

Oct 24, 2019

As must as I would like to say its a great flyer and all its kinda hard when you buy the PNP and doesn't come with a prop or prop adaptor

• Overall
• Quality
• Value

SU-35 MKII FIGHTER JET 735MM (29") EPO (PNP)

Jul 04, 2019

Great little airplane. Bit difficult to put together and fairly noisy but all good fun anyway

• Overall
• Quality
• Value

Difficult

Jan 23, 2019

not easy to pilot. Need speed. Sound amazing. Many crash but can be repaired.

• Overall
• Quality
• Value

Totally Surprised and Impressed

Jan 15, 2019

This jet flies surprisingly fast even with the stock 3s system and you’ll be happy with its performance once you get past the easy but time consuming build. Initially I was very frustrated with the build process because this foam is not glue friendly. Also there is not a lot of literature on CG or set up instructions. I had to turn to YouTube videos for help.
I do recommend it but if you decide to get it, make sure you are patient with the glueing and may take a couple of days to fully glue the whole plane properly. Don’t rush through it because it may come together poorly.
So don’t think you’ll be off and running on the same day. Lastly I recommend a couple of minor mods. Consider reinforcement of the fuselage front air intakes and this one is a must, add some landing skids or risk the chance of scraping your prop. This next mod I did for ease of prop swapping, I glued 2 pieces of balsa wood and screwed in my motor mount. The build calls for gluing in the motor mount (not a good idea).
Keep the servo throws very low and this thing will blow you away at how well it flies.
I’m having lots of fun with it.

• Overall
• Quality
• Value

Super Suchoi

Oct 19, 2018

This little „jet“ ist absolute worth the money!
Easy to build, easy to fly...but a little bit noisy.

• Overall
• Quality
• Value

Very funny

Sep 17, 2018

Ottimo aereo per voli veloci e spensierati, veloce da assemblare e abbastanza piccolo da essere trasportato con qualsiasi mezzo. spedizione in 3 giorni. very gooooooood

• Overall
• Quality
• Value

Cheap but good fun

Sep 10, 2018

Easy to build with 5 min epoxy , flies very well indeed to be honest , you can realy get her slow with nose up attitude which looks awesome then open her up for some fast flying HOWEVER she is very noisy so bare this in mind b4 you buy her .
Great plane for the ££ and very easy to fly slow or fast , landings are easy as also the hand launch ...Enjoy

• Overall
• Quality
• Value

More Power needed, Rudders not solid

Sep 08, 2018

The power of the motor is not enough for good flights. I will test another prop with differnt size. The rudders get fast broken at the hinge. I insert some plastik hinges with glue. Now it works and it is solid enough.