This Super Bright 3 watt Red LED comes mounted to an aluminium heatsink and is pre-wired with a JR style connector.Perfect for night flying!Spec:
Input: 2.5-3 volts
Brightness: 70-80 Lumens
Really super bright led. Tried with a 1S LiPo and still works! Less heat and proper use under 3V using a resistor.
Impressed!These are great, very bright. Put 2 in serial and 2 parallel on a 6 volt ubec and you have great navigation lights on your plane or copter.very bright, I have 2 on front of my quad for night flying. 2 in series with 2s is running well.Nicht direkt an ein 3,7 Volt Lipo anschliessen. Brennt dann nur 1 Millisekunde und dann ist sie defekt.
Ein Widerstand von 33 Ohm irgendwo dazwischen lten, und es funktioniert super.monte en bout de bras sur un quadri elles marchent nickel !assez puissante quand meme...These LEDs have maximum ratings around 3 volts, 200 ma, and three watts. Add current limiting resistor to prevent exceeding maximum rating. Good LED to make strobe light for quads and planes.These are super bright even it the sunlight. I use them for orientation on my large hex, red on back, white in front. I never loose orientation!Para la. Fcil visualizacinlighting up your mini qav250These are good when run of a 1 S pack. 4v is ideal. However, string three of them in stores and they work will off A 3S pack. Note that the different colors don't all give the same output in terms of brightness at the same voltage, so red red blue will be different than red red red.... They also get warm to the touch when powered by 4 V..
No File Name download now [1010kb] Typical all LED Data sheet download now [1010kb] Leds connection to RX download now [4749kb] Leds connection to RX with stepper download now [531kb]