Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

T-109 95% RTF brushless EDF w/ motor & ESC

T-109 95% RTF brushless EDF w/ motor & ESC

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
2900 g
SKU:
T-109
Product
Description
The T-109 RTF comes complete with brushless motor, Lipoly pack, ESC and all servos installed. Assembly of the T-109 wing, canopy and tail can be done in 45 minutes. Include your own receiver to be ready for your first flight in under 1 hour!
 
Specifications:
Fuselage Length : 780 mm
Wingspan : 1200 mm
Flying Weight : 650g 
Power system  : 2 x 2826 brushless outrunner
Battery : 3 cells 11.1V - 1500mAh Li-Po

Included :
Motor : 2 x 2826 Brushless outrunner motor
ESC : 25A
Servos : 3 x 9g
Lithium Polymer Battery (worth $25.00USD)
Product
Specifications

Additional Information

  • SKU:
    T-109
  • Brand:
    N/A
  • Capacity (mAh)
    No
  • Shipping Weight(g)
    2900.00
  • Length:
    0.00
  • Width:
    0.00
  • Height
    0.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very good model. Received very quickly, well packaged, all intact. In flight, stable and easy to manage. I am very pleased.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is a great plane made by guanli some will say they are rubbish but these people dont even test the model they just trash talk them i fitted my model with two tower pro 2408-21 motors with 6x4 APC props two ESC's and also two 3cell zippy 1000mah lipo's were added for a perfect centre of gravity from memory the plane took off from a grass runway lift off was around 10-15 meters full power was around 60kph in speed as a rough guess nicely made!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Oh brother, more garbage from Guanli!!



DON'T buy anything Guanli !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
JUST LIKE SINJI STATED ABOVE ABOUT THE THE PUSH RODS I ALSO HAD TO CHANGE THE AILERONS . I ADDED TWO HS55 SERVOS TO CONTROL THEM AND IT NOW PERFORMS MUCH BETTER . I TOO HAD TO ADD ABOUT TEN OZ. IN THE TWIN COWLS FIVE IN EACH TO BRING THE NOSE DOWN DEFINETLY NOT FOR BEGINNERS OR EVEN SOME INTERMEDIATES.SUGGEST THAT BEFORE FLT YOU CHECK ALL YOUR BALANCE POINTS DON'T FORGET THE SIDE TO SIDES ONE.THIS PLANE WAS VERY UNSTABLE UNTIL MODIFICATIONS
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I changed push road for elevator and rudder because It is weak.

I added about 80grams of weight in the front of the cowl.

I changed aileron controls to direct linkage of 2servos.

I extended an aileron area to double.

Thrusts are enough by default.

Looks very nice in the air.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.