Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

T-45 R/C EPO Jet (Kit)

Generating Links

T-45 R/C EPO Jet (Kit)

Price:

Now save save $0.00 $0.00

$29.99
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
LS-T45ARF
want FREE shipping? Click here to find out more!

The T-45 Is an aircraft carrier capable training jet still in use by the US Navy today. This scale T-45 is a sure step in your training as an RC Jet Pilot!

Molded from shock resistant super tough EPO foam this jet comes ready to assemble and also includes a steerable front landing gear, fixed main landing gears and a 5 blade 64mm EDF fan unit.

You will need a 3S1P 1500mAH lipo, 30Amp ESC, Transmitter and receiver with 4 or more channels and elevon mixing, 3 x 9g servos (one for the steerable front landing gear, one for the ailerons and one for the elevator). The 64mm EDF unit comes pre-installed in the fuselage making the installing your choice of EDF brushless motor a breeze.

Specifications:
Wing Span: 780mm
Length: 880mm
Flying weight: ~610g
Ducted fan: 64mm Fan unit (included)
Battery compartment: 90x46x46 (MAX)
Radio Channels: 4

Required:
Battery 1500mah 3s1p
Motor: B2040 Brushless inrunner (to suit 64mm EDF fan unit)
ESC: 30A
Servo: 3 x 9g
Radio: Your own Tx/Rx

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Sascha0512 | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 09, 2013

Das Modell aus EPO ist echt sehr Stabil und hllt einiges aus.

Ich fliege das Modell mit einem 4200kv Motor und einem 30A regler und einem 8Blatt Impeller als akku verwende ich ein 1900Mah 3S 30C akku und damit sind ca 3 1/2 Minuten vollgas drinn es passen aber auch ohne probleme die Turnigy 3000mAh 4S 20C Lipo Pack (Produkt ID: T3000.4S.20)rein aber da sollte mann dann den passenden motor dazu haben sonnst raucht der motor ab.



Das modell ist sehr stabil in der luft und ist auch was fr vortgeschrittene Anfnger.



Handstart ist ohne probleme mglich und das landen ohne Fahrwerk ist auch kein problem.

Das Modell ist echt zu empfehlen.

whipper Snapper | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 18, 2013

took mine for its first flight this morning....as the ground was too wet for ground take off I did hand launch....1st light toss....took off level no problem whatsoever, fantastic flyer, I using a 35esc 6 blade EDF 4300KV with a 3S 1300mh Nano Tech. Lands beautifully it very gracefull in the sky and very fast on rolls which I like and yet very stable. not super fast with this set up but fast enough far from slow. But as a trainer fighter jet it suites it very well and the construction time was about 40mins quality pretty good. Can fly this jet slow too easily under 50pcnt throttle. Nice performing T45.5/5!

Gunther | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 12, 2013

I had Motor, Speedy and Batteries already. Perfect for me, Plane was quick to build and flies great. I have never installed the undercarriage , bellylanding is easy to do. Only bad thing is the red nose. The material is too thin. I add some foam from inside, that helps to avoid any damage.

NumnutChriS | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 01, 2013

The plane is rather far pre-built, thus a kit, and mine had all parts well aligned and glued. The cons were the fan unit was not so easy to replace as it was glued in (I had a complete unit ready for this). Also the main wing lock, rear pins, are pretty weak.

elektriker | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

May 28, 2013

Super zufrieden mit dem Teil. Hab ein leichtes EZFW eingebaut. Damit macht es noch mehr Spass. Sieht super aus. Und ist wohl ein bisschen schneller, war mir aber nicht wichtig. Motor: Turnigy 2615 4800kv, ca. 31A an 1,6Ah 3S.

Chrisjon | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

May 25, 2013

I bought this kit, its good quality and arrived with no damage. It took me 7 hours to assemble which i built with spare parts i had laying about, and for the maiden flight it flew really well. Ailerons only need about 60pcnt travel. I didnt have enough power on 3s so i put in a 4s 1600mah nano tech which fits snugly. I burnt the motor out and left a smoke trail behind me which i had a chuckle about so now im waiting on a replacement motor and fan that can handle 4s. Its best to set this hawk up to handle 4s. The only real drama is accessing the fan inside. Theres no proper cut out for it. U can put the motor in using magnetic screw drivers but to remove the whole fan unit u need to cut the bottom of the fuse. Space is a lil tight up front so i mount the esc in the air ducting, works well. Other then that its a sweet flying little edf on 4s.

Wolfgang | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2013

Super gemachter kleiner Flieger. Die Flugeigenschaften sind mit 3S 1800 eher trainermig und vollkommen problemlos. Ausgerstet wurde der kleine mit den Komponenten aus einem zerbrselten AMX Jet. Der Impeller der beiligt ist haargenau der gleiche. Ein Stck mattschwarz lakierter Joghurtbecher als Schubdse (53mm)bringt reichlich Performance.
Querruder ber 2 Servos im Flgel direkt anlenken, die eingebaute Torsionsanlenkung hat reichlich Spiel. Die Oberflche ist fr einen Schaumflieger wirklich gut. Etwas zustzliches Klebedekor und der Dinger wird richtig hbsch. Nehme gleich noch einen zweiten fr einen fiesen 4S Antrieb und werde auch das Seitenruder noch anlenken. Tolles Gert fr zwischendurch.

spocktra | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 18, 2013

Amazing value for money.Although not for the novice builder as the instructions are pathetic.Great quality epo frame with ply and cf in the right places.Use a strong servo for the elevator as it has to push two rods to two seperate elevator halves.My set up is.
Motor/fan-Lander 64mm 4000kv
Esc-Turnigy trust
Servos-Turnigy mg's 2kg torque
Tx/Rx-Frsky.
Battery-1800mah 4S
AUW-670g-Power-665watts @40amps.
Some foam need removing to gey battery far enough aft for cg.

brady | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 10, 2013

Great kit received it today and built it today amazing quality for the price, this one will run on 1500mah 3s1p and 4800kv inrunner. considering buying second for more powerful set up. very impressed, great quality, great price, great job HK.

Zebulon | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 08, 2013

Mijn eerste vlucht gedaan en gelijk fpv gevlogen. geprobeerd met een 3 cells 2200 kwam ie niet los van de grond. toen een 3cells 1000 mah en vloog perfect voor een beginners edf (niet eens naar de cg gekeken op het oog alle stuurvlakken recht gezet en hoefde tijdens het vliegen niks uit te trimmen) Vliegt ook super langzaam en heel goed controleerbaar. goede vliegtijd terwijl mn fpv set op de zelfde accu zat. extra gewicht van de orange stabilizatie en zelfgemaakte rudder 1 servo en stuurstang extra :) 4 goedkoopste 9gr servo's en stuurt super precies kon het gewoon niet geloven. landen op gras zou ik niet aanbevelen met landings gestel.

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories