Tarot needs no introduction, their name is synonymous with quality and their 2 axis ZYX22 gimbal controller and T-2D brushless gimbal for the GoPRO 3 is no exception.
The Tarot’s T-2D gimbal is designed specifically for the infamous commercial quality Gopro Hero3. Using 6061T6 aluminum alloy full CNC precision machining, and their incorporation of the brushless motors as part of the overall framework reduces size and weight. The T-2D has been engineered to perfectly balance out with the GoPro3 so the load on the motors is minimized and require almost no tuning. The T-2D comes with a custom two layer vibration isolation mount and BLGC mount and has various frame mounting options.
The Tarot ZYX22 Brushless gimbal controller is unique from all the other run of the mill BLGC on the market. They removed the FTDI chip from the board to save size and weight, but is just as easy to use with the included USB adapter. The Tarot’s computer user interface for setup and tuning (if required) is the easiest and most intuitive seen yet. The Tarot packs in more options, like support for rate mode or position mode as-well as custom initial pitch angle, and support for standard RC input as well as S.BUS and Direct DSM2/DSMX input via a satellite receiver. The T-2D combo is simply the most refined brushless gimbal for a GoPro 3 on the market.
• Vibration isolation mounting
• Integrated motor and frame design
• GoPro 3 direct mounting
• Supply voltage polarity protection and voltage compensation
• Short-circuit protection
• Custom initial pitch angle
• Sensitivity parameter adjustment support and software
• Supports joystick rate mode and position mode
• Dual 32-bit high-speed ARM core processor
• Easy to use software
Working Voltage: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery)
Working current: 200mA-500mA (power supply voltage and the motor related)
Working temperature: -15c ~ 65c
Processor: Dual 32-bit high-speed ARM core processor
Sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers
Maximum angular rate: 2000 ° / Sec
Maximum acceleration: 16g
Control frequency: 2000Hz
Motor drive frequency: 20KHz (no noise smoothing drive)
Control accuracy: 0.1 deg
Control angle range: -45Deg ~ 45Deg (roll), -135 ° ~ 90 ° (tilt)
Power Interface: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery)
GOPRO Hero3 (not included)
ZYX3 rotor gyro USB cable group × 1
GOPRO two-axis gyro sensor head × 1
GOPRO two-axis gyro head master controller × 1
USB computer interface x 1
T-2D gimbal with motors and isolated mounting
ZYX22 brushless gimbal controller
Amazing device, rock solid from the box, and excellent damping as well, solved my "jello" effects. Running it on a 460Mh 2 cell lipo with no issues.
<iframe width="560" height="315" src="//www.youtube.com/embed/i4A29diRGPc" frameborder="0" allowfullscreen></iframe>Put this gimbal on my H550 Hexacopter and it is brilliant. Thanks HobbyKing
Here is a demo and first aerial video
www.youtube.com/watch?v=zSt28ol1CtgGopro gimble for "idiots"
Mount camera, connect battery ... look at the pretty LEDs and like magic see it find level ....... now "FLY" .............. Sorry but that's it ! ! ! ! ! !
No jello, no shakes, PERFECT, makes my last 3 years of experimenting a total wast of time. Just stop trying and buy one. 100pcnt perfect on the front of a HK Scorpion Y6.
PS. I have connected it to the GUI, BUT it is a wast of time. Simply bolt on and ENJOYFor that price the best ready-to-fly brushless gimbal. It works as perfect as e.g. the DJI Zenmuse. Just out of the box perfect. Be sure to mount the Gopro before you connect power. Otherwise you will have to recalibrate the sensores. I am very impressed. the weight is verly low for a brushless gimbal. I can reccomend it to everyone.
Nice brushless gimbal specifically balanced for GoPro3 camera that is good for standalone application wherever you 2-axis want stabilization. You also may want to buy a Tarot sparate item "GOPRO HERO3 Video And Charging Cable (TL68A10)" that supplies power to GoPro as well not (yet) sold by HobbyKing, but available elsewhere. As a just video out alternative from HobbyKing you can buy "Gopro3 AV cable" (PRODUCT ID: 258000077).The Material finish is very well but to precisely, gopro clamps and take little damage. The wight is because of the aluminum on a Maximum. Damper, Motor and Platin works perfect. Best price for this Gimbal. Very recommended!! I need the Gimbal on my Dji Naza 450.Cok kaliteli bir gimbal, kamerayi takmadan calismasini, gopro3 haricinde kamera takmay beklemeyin.
a high-quality gimbal, I recommend it, for just gopro3
Mounting dimensions download now [47kb] No File Name download now [123kb] No File Name download now [594kb] No File Name download now [13kb] No File Name download now [339kb] Weight with satellite receiver download now [323kb] Controller board download now [2174kb] Controller board download now [2174kb] Controller board download now [2174kb] Tarot gimbal on DJI F550 download now [770kb]