Total Price


Cart 0 Cart 0 Loading...

TauLabs Sparky 2.0 32bit Flight Controller

Generating Links

TauLabs Sparky 2.0 32bit Flight Controller


Now save save $0.00 $0.00

Already Purchased Discontinued Product

Please continue searching for a similar product.
want FREE shipping? Click here to find out more!

TauLabs Sparky 2.0 32bit Flight Controller

The TauLabs Sparky 2.0 Flight Controller is the next generation of flight controller from TauLabs. It features a more powerful STM32F4 processor running at 168MHz with increased memory and flash. This is great for storing and flying longer waypoint sequences, flight logging and running more complicated code like picoC scripting. The FC runs on the TauLabs or OpenPilot open source software.

There is now more connectivity (RCVR, Flexi, Main, I2C Aux) which is really useful for running external magnetometer, GPS, OSD, spectrum receivers, etc.  FrSky Telemetry support for either Sensor Hub or S.Port style receivers. It comes with a built in RFM22b radio that can be used for telemetry or with openLSRng. Supplied antenna plugs straight onto the FC.

Lots more features with support for buffered outputs to drive LEDs or brushed motors, dual analog input voltage and current monitoring, and even CAN buss for use with brushless gimbals.

The FC comes with its own protective case (or run it bare in the usual FC mounting).

All the extra functions won’t slow you down with this versatile high-speed flight controller.

• Runs TauLabs or Openpilot open source software
• STM32F4 Processor running at 168MHz and more memory and flash
• More connectivity (USB, RCVR, Flexi, Main, I2C Aux)
• Full sensor suite of course. MS5611 barometer and MPU-9250 combined gyro/accelerometer magnetometer, 3 axis gyro
• CAN Bus which is very useful for talking to external devices like the brushless gimbal to coordinate POI tracking or control the gimbal pitch from transmitter
• Dual analog input for voltage and current monitoring
• DAC output for VTX audio telemetry
• Four buffered outputs to drive either LEDs (indicate flight status) or brushed motors
• RFM22b radio can be used for telemetry or with openLSRng
• Flash chip which can be used to store flight plans, picoC code, or flight logging (black box)

Power connectors: JST-SH 4-pin
Dimensions: 36 x 36mm
Weight: 13.5g

1 x Sparky 2.0 Flight Controller
1 x Plastic cover (w/4 screws)
4 x 4 Pin cables
1 x Antenna

Upload video

Only registered users can upload video. Please, log in or register

Sort by
Most Recent Topics
* Nickname:

* Your Reply:

Please, enter the text shown in the image into the field below
*Verification Code:
Post a new Topic
* Nickname:

* Your Topic:

Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

rog | Verified Buyer

  • Overall
  • Value
  • Quality

Very Good Flight Controller hardware for various purpose

Sep 04, 2018

Connectors and select peripheral outputs are well choosen

Rolf | Verified Buyer

  • Overall
  • Value
  • Quality

Very good flight controller hardware

Sep 04, 2018

Very good sensors on board, useful connectors for various purpose.

sasa_tg | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Sep 14, 2016

Quality seems to be an issue with mine. The antenna connector is soldered with lots of excess solder on one side so it is impossible to connect antenna, PPM radio (brand-new FRSky D8R from Hobby King which is bound to receiver and works) does not power up so the board can not be used. Just in case: radio is configured as PPM, battery is connected, jumpers jn receiver are set properly)

Really disapointed.

nivek88 | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 22, 2016

I fly the original one of the sparky 2.0 board and now I bought this one from hobbyking for the half price of the original one.
At the first tests it works perfect. No issues yet. Only the color is different.
And yes it is better, if Hobbyking deliver it without pins, so you can solder pins if you want.
I solder cables directly to flight control, so I had to desolder the pins first.

Hobbyking: please stock in Eu warehouse. Thank you!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!