New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

E-Turbine TB-250 FPV Racing Quad

E-Turbine TB-250 FPV Racing Quad

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
643000003-0
WANT FREE SHIPPING? Click here to find out more!

E-Turbine have done it again with the release of the TB250, another fantastic high quality racing quad that performs as great as it looks.

This super sleek model comes pre-assembled with a heavy duty alloy top frame, re-inforced glass fiber bottom frame, four TB2204 brushless motors, four 12A ESCs, a 140 degree Camera and the tried and tested CC3D Flight Controller that is pre-flashed with Open Pilot Firmware.

Make no mistake, this is a high performance quad that is purpose built for 250 size FPV racing.

With high intensity front LEDs and a super bright blue LED strap at the rear, orientation is made easier and it will help you and your competitors keep track of this fast moving quadracer.  The lights can be set for five types of flashes and have 8 levels of intensity so that even night flying is possible.

All you need do is add your own RC gear, connect your own video transmission system to the included Sony 700 CCD camera, plug in a battery pack and you are ready for the starters pistol!  

If you want to cross the finish line in first place you will need a winner of a racing quad and the E-Turbine TB250 is certainly just that!

Specs:
Dimensions: 205x108mm
Weight: 408g (without battery)
Motors: TB2204
ESC: 12 Amp
Camera: IC Sony CCD 700
Recommended Battery: Lipoly 3S~4S 1300~1800mAh (not included)

Includes:
1x E-Turbine TB250 FPV Quadracer
1 x Carrycase

Required to complete:
Radio transmitter
Receiver
LiPo Battery
Video Tx/Rx System

  • SKU 643000003-0
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 922.0000
  • Packaging Length 270.00
  • Packaging Width 90.00
  • Packaging Height 270.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Frame is very poorly designed; the legs on the frame are extremely weak, in particular there are screw holes to connect the legs to the ESC coverings, which results in an extremely thin part of the frame that is extremely fragile. We bought 2 of these a leg snapped on both after a few light uses / no crashes.
I've used the components and rebuilt on another frame; the components are fine. Just a very weak case.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Frame is very poorly designed; the legs on the frame are extremely weak, in particular there are screw holes to connect the legs to the ESC coverings, which results in an extremely thin part of the frame that is extremely fragile. We bought 2 of these a leg snapped on both after a few light uses / no crashes.
I've used the components and rebuilt on another frame; the components are fine. Just a very weak case.

Looks great, i purchased it at USD$50.00 BUT doesn't work fine, the break cable for the receiver are really bad quality, the flight controller (CC3D) not really good, when i finally could power the motor, they spin uneven, i don't know if is the ESC, the motors or the FC. Waiting now for a NAZE32 to see what happens

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks great, i purchased it at USD$50.00 BUT doesn't work fine, the break cable for the receiver are really bad quality, the flight controller (CC3D) not really good, when i finally could power the motor, they spin uneven, i don't know if is the ESC, the motors or the FC. Waiting now for a NAZE32 to see what happens

Muito bonito, o acabamento vermelho chama atenção durante o voo, fácil de configurar, basta acessar o Librepilot. Os LEDs consomem bastante carga, o eles desligado o voo dura bem mais, os motores e ESCs esquentam pouco.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Muito bonito, o acabamento vermelho chama atenção durante o voo, fácil de configurar, basta acessar o Librepilot. Os LEDs consomem bastante carga, o eles desligado o voo dura bem mais, os motores e ESCs esquentam pouco.

amazing quad, wasnt to sure about the specs as they are hardly any but common sense made it clear for me reagrding 3s or 4s set up, but having only 12 amp esc and watching thrust test on 5inch prop on youtbe , i went for 3s , anyhow stuck some graphenes 65c 3s on and that thing goes like a rocket,, super fast,, love it, with gem 5045bn props, top camera included and 200mw tx, wasnt to sure about cc3d FC set up wheather or how to set up, but watched 360 vid, wiped the board clean and installed all fresh with librepilot, very easy once watched vid, and everything works fantastic, no wobbles or strange flight behaviour,,, top quad for getting in fpv,, only down side is that broke already couple of arms but fixed them diy style and back in the air,, ,oh and the led are the brighest iver ever seen, looks brilliand in the air,, 5star highly recommend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

amazing quad, wasnt to sure about the specs as they are hardly any but common sense made it clear for me reagrding 3s or 4s set up, but having only 12 amp esc and watching thrust test on 5inch prop on youtbe , i went for 3s , anyhow stuck some graphenes 65c 3s on and that thing goes like a rocket,, super fast,, love it, with gem 5045bn props, top camera included and 200mw tx, wasnt to sure about cc3d FC set up wheather or how to set up, but watched 360 vid, wiped the board clean and installed all fresh with librepilot, very easy once watched vid, and everything works fantastic, no wobbles or strange flight behaviour,,, top quad for getting in fpv,, only down side is that broke already couple of arms but fixed them diy style and back in the air,, ,oh and the led are the brighest iver ever seen, looks brilliand in the air,, 5star highly recommend.

Got this as my first FPV quad, and it's been a blast so far. Couple of hits but nothing broken except for props (get some GemFan 3-blade!). I removed the landing legs to save weight and drag, but this also prevents the arms from getting torqued off in a crash. Came with a carrying case. Super-bright LED bars. Two thumbs up from this guy! If you want to see it fly, check out my YTube channel "CallSignVman" for videos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this as my first FPV quad, and it's been a blast so far. Couple of hits but nothing broken except for props (get some GemFan 3-blade!). I removed the landing legs to save weight and drag, but this also prevents the arms from getting torqued off in a crash. Came with a carrying case. Super-bright LED bars. Two thumbs up from this guy! If you want to see it fly, check out my YTube channel "CallSignVman" for videos.

CHANGE ALL THE PROPS BEFORE YOU FLY THIS QUAD!!!!!!!!!!!!! It is a well built quad except for the props. It uses the Open Pilot Software for setup. All you do is bind to an airplane type in your transmitter and follow the Wizard in OP. I had about 12 great flights with this quad till the prop broke in flight and it crashed. I bent three of the four arms and busted my battery. My luck....HK has no parts in stock. Waiting for replacement parts now.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

CHANGE ALL THE PROPS BEFORE YOU FLY THIS QUAD!!!!!!!!!!!!! It is a well built quad except for the props. It uses the Open Pilot Software for setup. All you do is bind to an airplane type in your transmitter and follow the Wizard in OP. I had about 12 great flights with this quad till the prop broke in flight and it crashed. I bent three of the four arms and busted my battery. My luck....HK has no parts in stock. Waiting for replacement parts now.

Really stable quad..setup with devo 802rx has everything inlcuding vtx..didnt find props and instructions for vtx until the day after..they were under the foam in the lid. Used libre pilot to set up the quad..you can find instructions on youtube..don't erase settings when updating. I had trouble getting switches recognised, with deviation you have to assign the switch you want to channel 5 and ch 6 slider(i used pot aux 6) wiring tricolour thr, first yellow ail blue ele, green rud and 2nd yellow gear ch5 i put the black in aux 1..i got this in the sale, but as far as im concerned its well worth the retail money as its fully assembled and just works. Im pretty good at helis, and didnt want the hassle of learning new set ups.
and this was ideal..A little bit of thought but not too taxing...Enjoy!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really stable quad..setup with devo 802rx has everything inlcuding vtx..didnt find props and instructions for vtx until the day after..they were under the foam in the lid. Used libre pilot to set up the quad..you can find instructions on youtube..don't erase settings when updating. I had trouble getting switches recognised, with deviation you have to assign the switch you want to channel 5 and ch 6 slider(i used pot aux 6) wiring tricolour thr, first yellow ail blue ele, green rud and 2nd yellow gear ch5 i put the black in aux 1..i got this in the sale, but as far as im concerned its well worth the retail money as its fully assembled and just works. Im pretty good at helis, and didnt want the hassle of learning new set ups.
and this was ideal..A little bit of thought but not too taxing...Enjoy!

This's my first 250 size Quad. It's a high quality FPV250 Quad! Not just plug and play though, you have to go through OpenPilot GSC to setup the CCD3 first. Once setup, this thing flies very smooth and beautifully! I use 3S 2200mA battery and get more than 10 minute flight. The high intensity front LEDs and the super bright blue LED strap at the rear are also very impressive in the flight! I used this link for reference: http://www.dronetrest.com/t/cc3d-flight-controller-guide/830

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This's my first 250 size Quad. It's a high quality FPV250 Quad! Not just plug and play though, you have to go through OpenPilot GSC to setup the CCD3 first. Once setup, this thing flies very smooth and beautifully! I use 3S 2200mA battery and get more than 10 minute flight. The high intensity front LEDs and the super bright blue LED strap at the rear are also very impressive in the flight! I used this link for reference: http://www.dronetrest.com/t/cc3d-flight-controller-guide/830

buy extra arms if you buy this, nice little 250, but even little crashes will deform the arms it will be unbalanced and oscillate and not fly. cf arms would make this a 5 star buy. they could of also avoided the aluminum arms braces, the aluminum also easily bends as it is made of very soft metal and does not support the arms for very light crashes... everything else is great. nice pdb and fpv gear. the lights are very bright and make pov flying a lot of fun.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

buy extra arms if you buy this, nice little 250, but even little crashes will deform the arms it will be unbalanced and oscillate and not fly. cf arms would make this a 5 star buy. they could of also avoided the aluminum arms braces, the aluminum also easily bends as it is made of very soft metal and does not support the arms for very light crashes... everything else is great. nice pdb and fpv gear. the lights are very bright and make pov flying a lot of fun.

Super high quality frame and construction, just wish it had some set-up instructions , this is way better than my Runner 250.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super high quality frame and construction, just wish it had some set-up instructions , this is way better than my Runner 250.

  1. 1
  2. 2
Customer files
With 1550mAh battery Download [133]
With 1500 mAh battery Download [142]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking