The Tiny OP OSD for CC3D flight controller is a super small OSD with Minoposd firmware compatible for CC3D/Mini CC3D/CC3D Revolution/Mini CC3D Revolution flight controllers based on Openpilot.
The Tiny OP OSD for CC3D flight controller is an upgraded MinimOSD and has been modified to take advantage of custom firmware options. Default firmware is Minop osd 15_01. It also does not have the DC converter which reduces heat when powered from a flight controller.
You can also connect two batteries up to 4S LiPoly so you can see the main flight battery voltage on screen and the second port will allow your FPV battery voltage to be displayed as well.
Dimensions: 16 x 16mm
Firmware version: Minop osd 15_01
1 x Micro OSD board
2 x pins (sets)
This unit seems to have DTR pin not connected, but you still can flash it with manually disconnecting and quickly connecting ground right when upload starts.This thing is tiny! Works great for my build. You will need a 5v ftdi breakout in order to program. Displays battery voltage, timer and lots of other info depending on which fc you are running. Will buy again.Necessary instructions to the values of contacts. Quite clearly what for what. Very light and compact. Necessary instructions to connect to the flight controller.While this osd may work with the original cc3d in a very limited manner it is not programable. Using an FTDI you get the unable to talk to boot loader error while trying to update the unit firmware. This board lacks the necessary contact pads to install a boot loader so you can never update the firmware on the device.