This is an exciting mini FPV Quadcopter connection ready package. The Tiny QX 90 Micro FPV Racing Quadcopter has everything you need already installed on the 90mm carbon fiber X frame.
It comes complete with the usual’s, such as an SPracing F3 EVO Brush Flight Controller, 8520 brushed motors, brushed ESCs, 56mm propellers, 3.7v 600mAh batteries but has the additional goodies of 5.8GHz 25mW 32 channel VTx, 520TVL HD CMOS 1/4“ FPV camera and a Frsky compatible 8ch 2.4GHz receiver.
All you need is bind it to your Taranis or FrSky compatible transmitter, put on your goggles and off you go racing around your house or out in the backyard just don’t get caught in the spiders web.
• 90mm wheelbase
• SPRacing F3 EVO Brush flight controller
• 520TVL HD CMOS 1/4“ camera (NTSC)
• 2.4GHz Frsky compatible receiver
• 5.8GHz 25mW 32 channel VTx with antenna
Dry weight: 39g (Excludes battery)
Flight controller: SPRACING F3 EVO BRUSH
Firmware version: Cleanflight 1.13.0
2.4G Receiver: Frsky compatible 8ch Receiver
Motor size: 8520 Brushed
Propeller diameter: 55mm
Camera: 520TVL HD CMOS 1/4 inch camera
Video output format: NTSC
VTX: 5.8GHz 25mW 32ch
Battery: 3.7V 600mAh
1 x QX90 Tiny FPV Quadcopter
2 x Spare 8520 Brushed motors
2 x Spare CW propellers
2 x Spare CCW propellers
2 x 3.7V 600mAh LiPoly Batteries
1 x Charger cable
1 x Propeller disassembly tool
1 x Manual
1 x 5~6 Channel FrSky or compatible Tx
1 x FPV Goggles or base station with monitor
A: 5865MHz 5845MHz 5825MHz 5805MHz 5785MHz 5765MHz 5745MHz 5725MHz
B: 5658MHz 5695MHz 5732MHz 5769MHz 5806MHz 5843MHz 5880MHz 5917MHz
E: 5705MHz 5685MHz 5665MHz 5645MHz 5885MHz 5905MHz 5925MHz 5945MHz
F: 5740MHz 5760MHz 5780MHz 5800MHz 5820MHz 5840MHz 5860MHz 5860MHz
Unit Weight (g)
Max Charge Rate(C):
Please disregard my previous review!
This thing is awesome once you realize the instructions are wrong! The instructions show what looks like an additional receiver board, at least for the FrSky version, the receiver is built into the control board and binding is done by shorting 2 solder pads on the very front corner.
Once bound and calibrated, this thing is amazing! ZERO video dropouts for as far as i dared to go. This thing is fast! Even with a slight breeze, control was superb! The props it came with did not stay on, used some spares from another micro drone i have and they worked great.I bought 2 different nano drones to have some fun around the house. This one CAME WITHOUT A DAMN RECEIVER! I'm literally going to just throw these in the trash, useless to me now.Bought the ARF version without RX and installed a 2.4GHz A-FHSS Mini RX from HK for my Hitec Aurora9 TX. For my utmost surprise this 5CH RX received 9 !!! channels when connecting it via ppm to the QX90 at UART2. This micro quad makes really a lot of fun flying it indoors or outdoors. And the best is I can fly it with my TX which I also use for the rest of my models. I flashed Betaflight 3.01 to the SPRACINGF3 EVO FC and adjusted PID's. The QX90 was originally very sensitive to Roll and Pitch commands when flying it with betaflight 3.01. So if somebody wants to have my PID's and adjustments, pls write me an emailBought the ARF version without RX and installed a 2.4GHz A-FHSS Mini RX from HK for my Hitec Aurora9 TX. For my utmost surprise this 5CH RX received 9 !!! channels when connecting it via ppm to the QX90 at UART2. This micro quad makes really a lot of fun flying it indoors or outdoors. And the best is I can fly it with my TX which I also use for the rest of my models. I flashed Betaflight 3.01 to the SPRACINGF3 EVO FC and adjusted PID's. The QX90 was originally very sensitive to Roll and Pitch commands when flying it with betaflight 3.01. So if somebody wants to have my PID's and adjustments, pls write me an emailVery nice tiny coreless racing drone, 8520 motor and 90 axle base make it powerful and enough endurance. LOVE IT!This little tiny something makes hell lot of Fun! I didn´t experienced any Issues with stock Props coming off. It flies very Stable so that you can Fly through Small Corners in your Flat or House. I fly it FPV with my Quanum Cyclops and i also added Prop Guards which i really recommend so your Props wont break and you dont have to stop your flight cause of need to change Props after crash. It can be programmed by Cleanflight Software but it really isnt necessary as the Stock setup out of the Box is perfectly set . Buy yourself lot of Lipos as it really really makes you addictive. There´s always min. 5 Flights i make everytime i fly :) The 1S 600 Mah Lipo gives you about 5 Min Flighttime and the other Lipo i use is a NanoTech 750mAh with about 7 Mins Flighttime. Its surprisingly powerful for having brushed Motors. Definitely full 5 Stars