New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

TowerPro Brushless Outrunner 3015-7 1000kv / 470W

TowerPro Brushless Outrunner 3015-7 1000kv / 470W

Discontinued Product

Please continue searching for a similar product.
Weight:
150 g
SKU:
TP3015-7
WANT FREE SHIPPING? Click here to find out more!

Possibly towerpro's ugliest motor. However it packs a powerful 470W punch and comes with the towerpro pressed bell motor reliability.
Don't be put off by the humble appearance, this is a solid motor!

Model: TowerPro 3015-7
Size: 37.2*60.3
Weight: 133g
Voltage: 10v
Idle Current: 2.2A
Suggested Battery Config: 3-4Lipo
Kv: 1000RPM/v
Shaft: 5mm
Max Eff Current: 30A
Max current: 40A
Max Power: 470W
Suggested prop: 10*5, 11*5

 

  • SKU TP3015-7
  • Brand -
  • Shipping Weight(g) 150.00
  • Length 0.00
  • Width 0.00
  • Height 0.00
  • Kv(rpm/v) 1000.00
  • Max Current (A) 40.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 14.00
  • Power (W) 470.00
  • Shaft A(mm) 5.00
  • Length B (mm) 41.00
  • Diameter C(mm) 37.00
  • Can Length D(mm) 16.00
  • Total Length E(mm) 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

muy buen motor,lo instale en un wing tiger de art-tech,las alas tienen 1.38mts.(54"1/2)peso(35.2oz).esc hk-60amp.bat 1.8amp. 3 celdas.el ascenso es rapido,tiempo de vuelo 10min.aprox.supera al motor original por un rato largo.helice de 10x4.7slow.el avion vuela placenteramente.no produce vibraciones.la temperatura es baja y tolerable al tacto.lo recomiendo.satisfaccion garantizada.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

muy buen motor,lo instale en un wing tiger de art-tech,las alas tienen 1.38mts.(54"1/2)peso(35.2oz).esc hk-60amp.bat 1.8amp. 3 celdas.el ascenso es rapido,tiempo de vuelo 10min.aprox.supera al motor original por un rato largo.helice de 10x4.7slow.el avion vuela placenteramente.no produce vibraciones.la temperatura es baja y tolerable al tacto.lo recomiendo.satisfaccion garantizada.

Dieser Motor ist Schrott.
Kaufte total 6 Stk. Allgemeines Problem: Unwucht, und zwar gewaltig. Die Lager machen das geschlage und geeiere nicht mit, und werden zerstrt. Auch bertragen sich die Vibrationen auf das Modell, was auch kritisch bis gefhrlich sein kann. Ich hatte noch nie einen Motor, wo die Glocke so stark eiert und schlgt! Die Magnete halten innerhalb der Glocke sehr schlecht und verrutschen....Also Finger weg davon! Ich schmeiss jetzt die 6 Motoren ins Altmetall. Da gehren sie hin.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Dieser Motor ist Schrott.
Kaufte total 6 Stk. Allgemeines Problem: Unwucht, und zwar gewaltig. Die Lager machen das geschlage und geeiere nicht mit, und werden zerstrt. Auch bertragen sich die Vibrationen auf das Modell, was auch kritisch bis gefhrlich sein kann. Ich hatte noch nie einen Motor, wo die Glocke so stark eiert und schlgt! Die Magnete halten innerhalb der Glocke sehr schlecht und verrutschen....Also Finger weg davon! Ich schmeiss jetzt die 6 Motoren ins Altmetall. Da gehren sie hin.

Esteticamente non bellissimo, ma una vera potenza.

Aesthetically it is not beautiful, but it is a real power

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Esteticamente non bellissimo, ma una vera potenza.

Aesthetically it is not beautiful, but it is a real power

Good motor.



quiet motor. be carefull with the long screws.

Ordered 2 motors. One hat a brocken wire inside after a few flights. Still working.



340 Watt&#x2F 29,4 A at Zippy 2200mah&#x2F40C with 11x5.5 Prop.



Build it in a MPX Gemini. Has enough Power, but could also be more. This motor is between the standard and the tuning setup that ist recommend by mpx.



A other prop could make it faster...



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good motor.



quiet motor. be carefull with the long screws.

Ordered 2 motors. One hat a brocken wire inside after a few flights. Still working.



340 Watt&#x2F 29,4 A at Zippy 2200mah&#x2F40C with 11x5.5 Prop.



Build it in a MPX Gemini. Has enough Power, but could also be more. This motor is between the standard and the tuning setup that ist recommend by mpx.



A other prop could make it faster...



good motor although before runing it take the time to take it appart and make sure all magnets are well glued, if they aren't a bit of ca will do the trick.

Other then that plenty of power good motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good motor although before runing it take the time to take it appart and make sure all magnets are well glued, if they aren't a bit of ca will do the trick.

Other then that plenty of power good motor.

Strong motor. very eassy to change the shaft.Delivery a lot of power wiht 3s, 14x4 APC and 2200mAmp-60 Esc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Strong motor. very eassy to change the shaft.Delivery a lot of power wiht 3s, 14x4 APC and 2200mAmp-60 Esc

Had this motor for two years. I did the required glueing and trimming of the mount screws and love it. Originally used on 3cell, but I recently put it on an edge 540 with an all up weight of 3.5 lbs. Using a 55amp turnigy delux esc and a turnigy 2450 4cell 30c battery. She is airborn in about 8 feet with great vertical. Will hover and do what ever you like. I get about 8 min flight time and the motor and esc are only slightly warm. Great job hobbyking!!!



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Had this motor for two years. I did the required glueing and trimming of the mount screws and love it. Originally used on 3cell, but I recently put it on an edge 540 with an all up weight of 3.5 lbs. Using a 55amp turnigy delux esc and a turnigy 2450 4cell 30c battery. She is airborn in about 8 feet with great vertical. Will hover and do what ever you like. I get about 8 min flight time and the motor and esc are only slightly warm. Great job hobbyking!!!



I bought this for my Yak54. It was 1/3 the price of the recommended rimfire motor.It mounted near perfect as a drop in alternative. Has plenty of power ,runs very smooth.I think its a little heavier but not much I had to add about 1/2 0z of lead to the tail to balance plane even after I modified the battery compartment so i could move it aft as far as possible.I am very pleased with the purchase. I am running a 11 X4 prop 1800 mah 3cell 40cw/ turnigy deluxe 55amp esc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this for my Yak54. It was 1/3 the price of the recommended rimfire motor.It mounted near perfect as a drop in alternative. Has plenty of power ,runs very smooth.I think its a little heavier but not much I had to add about 1/2 0z of lead to the tail to balance plane even after I modified the battery compartment so i could move it aft as far as possible.I am very pleased with the purchase. I am running a 11 X4 prop 1800 mah 3cell 40cw/ turnigy deluxe 55amp esc.

Excellent Product, At the best price AAAplusplusplus

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent Product, At the best price AAAplusplusplus

Excelente Motor,uso em um calmato de isopor tamanho 1x1,20 de asa com bateria 2200 mah, ESC TowerPro H40A Brushless Speed Controller.Tempo aproximado 8 a 10 minutos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente Motor,uso em um calmato de isopor tamanho 1x1,20 de asa com bateria 2200 mah, ESC TowerPro H40A Brushless Speed Controller.Tempo aproximado 8 a 10 minutos.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!